User Manual

14
Receiver Firmware Updates
If firmware updates are made available for the receiver side of
the 2-in-1, you can install the update yourself. The Spektrum
USB programming cable (SPMA3065, not included) and a PC are
required for updates. Go to the product page at SpektrumRC.com
for update information and to register your receiver. Registration is
required to download updates.
Update Process
1. Register your receiver and download the Spektrum programmer
and the firmware update for the 2-in-1 (when available).
2. Install the Spektrum programmer on your PC and open the
app. Connect the USB programming cable to your PC and
allow it to install the drivers.
NOTICE: In the programmer app there is an option to power
the receiver from the PC. Leave this box checked. DO NOT
connect a power source to the receiver at the same
time as the USB cable.
If the box in the programmer app is checked to power the
receiver from the computer, and the USB cable is plugged into the
receiver, and a power source is plugged into the receiver, there is
a high probability of causing permanent damage to the PC.
Make sure this check-box is checked to power the receiver
from the PC during the update.