User Manual

8
-+
-+
Antenna
Auxiliary (Light) Connectors
Motor Connectors
ESC Programming Port
Receiver Update Port
Steering
Bind Button
Switch Mount
Power Switch
Red/Green LED
IC3 Battery Connector
Aux 1
Aux 2
Diagram
NOTICE: Always disconnect the battery from the ESC when
you have finished operating your vehicle. If you leave the battery
connected with the power switch in the OFF position, the ESC will
continue to draw current when connected to the battery, resulting
in possible damage to the battery through over-discharge.
NOTICE: Do not connect a dedicated receiver battery to the
servo or programming ports. When the ESC/Receiver is turned
On it will provide the servo ports with 6V regulated power from
the main battery. If a dedicated receiver battery is connected to
the servo ports, the ESC/receiver may be damaged.