FIRMA 40A Lite Smart Brushed ESC Manual

18
Problem Possible Cause Solution
Steering Servo –
Operates; motor
does not run
Damaged motor
Test the motor apart
from the vehicle
system, repair/replace
motor as needed
Incorrect
transmitter/ESC
calibration
Adjust throttle travel/
other throttle settings
on the transmitter/
ESC. Repeat the ESC
Calibration Procedure
Steering/Motor –
Do not function
Low battery
voltage
Recharge/replace
Wrong model
memory selected
on transmitter
Select correct
model settings on
your transmitter, refer
to transmitter and/or
receiver manual
Receiver not
bound to trans-
mitter
Bind transmitter to
receiver, refer to trans-
mitter and/or receiver
manual
Vehicle – Does
not operate at full
speed
Battery issue Recharge/replace
Incorrect
transmitter/ESC
calibration
Adjust throttle travel/
other throttle settings
on the transmitter/
ESC. Repeat the ESC
Calibration Procedure
Troubleshooting Guide