Instruction Manual

EN
11
CHANGING BATTERY VOLTAGE WHEN USING AVC
If you increase voltage going to your vehicle, the maximum steering gain
setting will have to be reduced.
At the same time, when increasing voltage increased throttle gain will help
manage the extra power.
For example: If a truck set up for 2S is upgraded to 3S, the truck may oscillate
at high speeds on 3S, requiring steering gain to be reduced. Throttle gain will
have a bigger effect on 3S, so increasing throttle gain may be benefi cial.
RECEIVER FIRMWARE UPDATES
If fi rmware updates are made available for the SR6100AT receiver, you can
install the update yourself. The Spektrum USB programming cable (SPMA3065,
not included) and a PC are required for updates. Go to the SR6100AT product
page at SpektrumRC.com for update information and to register your receiver.
Registration is required to download updates.
Update Process
1. Register your receiver and download the Spektrum programmer and the fi rmware
update for the SR6100AT (when available).
2. Install the Spektrum programmer on your PC and open the app. Connect
the USB programming cable to your PC and allow it to install the drivers.
NOTICE: In the programmer app there is an option to power the receiver from the PC.
Leave this box checked. DO NOT connect a power source to the receiver at the
same time as the USB cable.
If the box in the programmer app is checked to power the receiver from the computer,
and the USB cable is plugged into the receiver, and a power source is plugged into
the receiver, there is a high probability of causing permanent damage to the PC.
3. With the vehicle and receiver powered off, plug the updater cable into
the programming port on the SR6100AT. DO NOT turn on the vehicle or
receiver when the USB cable is connected. The PC should connect with
the receiver automatically.
4. Follow the on screen prompts in the to install the fi rmware fi le on the SR6100AT.
5. When the update is complete, unplug the updater cable from the receiver.
Make sure this check-box is checked to power the receiver from the PC
during the update.