Certificate

File E208470 Vol. 1 Sec. 3 Page 3 Issued: 2010-05-04

and Report Revised: 2010-07-22

CAT.NO. TG PC 1608-9 FIG. 1

FIG. 2

FIG. 3

ILL. 1

ILL. 2

ILL. 3

ILL. 4

ILL. 5

ILL. 6

ILL. 7

ILL. 8

General – Figure 1 shows a view of the complete enclosure of cat.no. TG

PC 1608-9. All catalog numbers are identical to that shown except for the

number of cover screws, and dimensions. See Table 1 and Ills. 1 through 8 for

additional details.

Enclosure Base

1. Base – R/C (QMFZ2/8), designated XANTAR 22UR(f1), manufactured by DSM

ENGINEERING PLASTICS INC, rated V-2, 125 °C, min. 2 mm thick, gray. For

details see Ill. 1 to 8. (E43392)

2. Mounting Holes (four provided) - Size 4.2 mm dia., external to enclosure

cavity and gasket. Cover screws must be removed to access mounting

holes.

Enclosure Cover

3. Cover - R/C (QMFZ2/8), designated XANTAR 22UR(f1), manufactured by DSM

ENGINEERING PLASTICS INC, rated V-2, 125 °C, min. 2 mm thick, gray or

clear. For details see Ill. 1 to 8. (E43392)

4. Channel -2.2 mm wide, 3.5 mm deep, extends around the perimeter of the

Cover to the Base (item 1).

5. Cover Screws /Lock (four or) - Stainless steel screws, AISI 304, 32 mm

long, diameter 3 mm. Screw inserted into cover and held in place by

stainless steel spring, AISI 304, 24 mm long. For details see Fig. 2 and

6. Gasket Material (to Base and Door) - R/C (JMST2) Sonderhoff Chemicals

GmbH type Fermapor K31-A 9808 and Fermapor K31-B-RF. Gasket is in

liquid form and poured into channel (Item 4) with a mixture ratio of 4

to 1.