User Manual

2
SAFETY INFORMATION
 Read the following safety information carefully before
attempting to operate or service the meter.
 To avoid damages to the instrument do not apply the signals
which exceed the maximum limits shown in the technical
specifications tables.
 Do not use the meter or test leads if they look damaged. Use
extreme caution when working around bare conductors or bus
bars.
 Accidental contact with the conductor could result in electric
shock.
 Use the meter only as specified in this manual; otherwise, the
protection provided by the meter may be impaired.
 Read the operating instructions before use and follow all
safety Information.
 Caution when working with voltages above 60V DC or 30V AC
RMS. Such voltages pose a shock hazard.
 Before taking resistance measurements or testing acoustic
continuity, disconnect circuit from main power supply and all
loads from the circuit.