I/R Thermometer Gun 8:1 800101, 800102 INSTRUCTION MANUAL SPER SCIENTIFIC
Contents 1. 2. 3. 4. 5. 6. 7. 8. 9. Page INTRODUCTION ........................................2 SAFETY SPECIFICATIONS .......................3 DISPLAY AND BUTTON LOCATIONS .......4 BATTERY REPLACEMENT .......................5 MEASURING PROCEDURE ......................5 CLEANING .................................................5 NOTES .......................................................6 SPECIFICATIONS ......................................7 WARRANTY ...............................................8 1.
2. SAFTEY SPECIFICATIONS Conforms to the following standards. • EN61326: Electrical equip. for measurement/control/labs. • IEC61000-4-2: Electrostatic discharge immunity test. • IEC61000-4-3: Radiated, radio freq. electromagnetic field immunity test. • IEC61000-4-8: Power freq. magnetic-field immunity test. • CFR 1040.10 subchapter J Class II Laser Product Tests were conducted using a freq. range of 80~1000MHz with the IR Gun in 3 orientations. The average error for the 3 orientations is ±0.5°C (±1.
3. DISPLAY AND BUTTON LOCATIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
4. BATTERY REPLACEMENT • Replace the battery when the Low Battery Indicator (5) is displayed. • Open the battery cover, install a fresh 9V battery and close the cover. Battery life expectancy is 16 hours. 5. MEASURING PROCEDURE • Point the IR Gun at the object to be measured. • Pull and hold the TRIGGER (1) to obtain a continually updated temperature until the trigger is released. "SCAN" (9) flashes on the display. • Press the °C/°F BUTTON (8) to switch temperature units.
7. NOTES • Emissivity is the ability of an object to emit or absorb energy. Your IR Gun measures emitted energy using a fixed emissivity value of 0.95 (which covers about 90% of typical applications). When measuring highly reflective surfaces, apply masking tape to the surface or a paint that has a 0.95 emissivity. If the object you are measuring is covered with frost, clear the frost to expose the object's surface before taking the measurement. • Your IR Gun has an 8:1 Distance-to-Spot ratio.
8. SPECIFICATIONS Model 800101 800102 Range -4~605°F -20~320°C -4~930°F -20~500°C Accuracy ±2% of reading or ±2°C (±3°F) at 25°C whichever is greater ±2°C (±3°F) from –20~100°C (-4~212°F) ±2% from 100~500°C (212~930°F) Resolution 0.5°C/F 0.2° C/F D:S Ratio 8:1 Thermopile 5~14µm Repeatability ±2°F (±1°C) Laser Output <1mW Wavelength 630~670 nm Response Time 500ms Oper. Temp. 32~122°F (0~50°C) 10~90%RH Emissivity: Fixed at 0.95 Storage Temp.
9. WARRANTY Sper Scientific warrants this product against defects in materials and workmanship for a period of 5 years from the date of purchase, and agrees to repair or replace any defective unit without charge. If your model has since been discontinued, an equivalent Sper Scientific product will be substituted if available. This warranty does not cover damage resulting from accident, misuse, or abuse of the product.
