Stopclock 810032
INSTRUCTIONS 1. Open the battery compartment and remove the tab between the battery and the contact point. 2. Select lap or cumulative time by pressing the MODE (blue) button. The upper display flashes the mode. 3. P ress the START/STOP (green) button to start or stop the unit. 4. P ress the SPLIT/LAP/RESET (red) button to record the lap or split time. 5. To reset the display to zero, press the STOP (green) button, then press the RESET (red) button.
Ruggedly design for prolonged use as both a bench-top count-up timer and a stopclock. Non-skid feet keep the unit firmly in place during use, yet it is small and light enough to be easily moved around the lab as needed. A large LCD and buttons make it easy to operate. Countsup to 10 hours with 1/100th second resolution in selectable cumulative or interval split modes. Comes complete with one AA battery and two cables for connection to an external trigger such as a photo gate.
SPECIFICATIONS Range Counts up to 10 hours Resolution 1/100th SEC Accuracy ±3 SEC / 24 hrs Dimensions 4½” x 4” x 2” (120 x 100 x 50 mm) Weight 7 oz (210 g) WARRANTY Sper Scientific warrants this product against defects in materials and workmanship for a period of five (5) years from the date of purchase, and agrees to repair or replace any defective unit without charge. If your model has since been discontinued, an equivalent Sper Scientific product will be substituted if available.
