Light Probe 850075 Instruction Manual SPER SCIENTIFIC LTD.
TABLE OF CONTENTS I. INTRODUCTION ............................................................................. 2 II. PANEL DESCRIPTION ................................................................... 2 III. MEASUREMENT PROCEDURES .................................................. 3 IV. SPECIFICATIONS .......................................................................... 3 VII. WARRANTY.................................................................................... 4 I.
III. MEASUREMENT PROCEDURES • Plug probe into the PROBE INPUT SOCKET. • Make sure the PROBE LOCK is in the lock position • Turn on the instrument by pressing the POWER button. • Point the LIGHT SENSOR toward the light source be measured. • Press the A (LUX/FC) button to select unit of measure. • Press the B (RANGE) button to select the optimum range. The results are shown on the LCD. The overload indicator ("- - - - ") is shown if the range is exceeded.
ONE YEAR WARRANTY Sper Scientific warrants this product against defects in materials and workmanship for a period of one year from the date of purchase, and agrees to repair or replace any defective unit without charge. If your model has since been discontinued, an equivalent Sper Scientific product will be substituted if available. This warranty does not cover damage resulting from accident, misuse, or abuse of the product.
