Meter Software 850080 Instruction Manual SPER SCIENTIFIC LTD.
Table of Contents Page Introduction ············································································ 2 System Requirements ··························································· 3 Software Installation ······························································ 3 Setup ····················································································· 4 Operating Procedures···························································· 6 License Information ·····························
System Requirements: At least one Communications Port VGA Monitor Type or higher RS232 Cable (840057 sold separately), and Win 95: 16 mb memory, 486, 586 or higher, or Win 98, Windows ME, Windows XP: 32 mb mem, 586 or higher. Software Installation: • Before installation, remove any previous version of the software. • With the computer turned off, connect the RS232 cable to both the computer's 9-pin COM port and to the meter's RS232 output. • Start the computer and insert the CD Rom into the computer.
System Setup (Fig. 1): • From your computer's Start Menu, select "Programs" and Click on "SPER." • Once the program opens, select "Setup" from the menu bar, then click "System Setup". • Enter a value in the "System Scan Rate" box to specify the sampling time (2 –3600 seconds). • Enter a value in the "Max Record Data" box to specify the maximum record number. • Click the "Comm. Port" selector to set the Communications Port. • Select the baud rate: 2400 (slow) or 9600 (fast).
Fig. 1 System Setup System Scan Rate (2-3600 Sec) 2 Max Record Data 1000 Comm. Port baud rate 2400 Text Display Type Angular Display Type Chart Display Chan. 2 Display 2 Display 2 1 Meter with one Display Meter with two Display Meter with four of more Display 9600 Save Exit Create a New Data File (Fig. 2) • From the program's menu bar, select "Setup", then click "Create New Data File". • Enter a file name in the "Data File Name" box. • Click on "Create" then click "Exit". 5 Fig.
Operating Procedures: Angular Display (Analog) • From the program's main menu bar, select "Monitor", then click "Angular Display". • Select the "Page Setup" tab. • Enter your settings (Fig. 3). • Click "Save." Fig.
Select the appropriate "Angular Displays" tab to view your settings. Below is an example of "2 Angular Display." Fig. 4 10-28-2002 00:48:11 1 0000675 2 Scan Rate 2 sec. Run 1. 2. 3. 4. 5. 6. 7. 8. 9. Chart Display Text Display Exit 7 8 9 4 Alarm Sound 5 Save Data 6 Timer: indicates the measured time. Counter: indicates the number of data recorded. Scan Rate Indicator: indicates the sampling time. Run/Pause button. Alarm Sound: check the box for an audible alarm. Save Data button.
Text Display (Digital) • From the Angular Display Screen, select "Text Display" (Fig 4). • Select the "Page Setup" tab. • Enter your settings (select the desired group and select a channel for each display, Fig. 5). • Click "Save." Fig.
• • • • Select the desired "Channel Display" tab to view your settings and results. Click Run. Before exiting, click "Save Data." Fig. 6 is an example of a "2 Channel Display" screen. Fig. 6 Page Setup 1 Channel 6 Channel Display 10-28-2002 00:48:11 8 Channel Display 2 Channel Display 4 Channel Display 0000675 %RH 1 Degree C 686 Chart Display 2 24.3 Angular Display 9 Exit Scan Rate 2 sec.
System Monitor • From the "Text Display" screen, click the "Chart Display" button (Fig. 6). • Enter the desired minimum and maximum ranges in the Y-Max and Y-Min boxes (Fig. 7). Click the Set Y-Axis Min_Max button whenever a new value is entered. • Click "Exit" to return to the previous menu. • Continue clinking "Exit" to return to the main menu. Fig. 7 68 %RH Scan Rate 2 sec 10-28-2002 11:30:26 Datafile.
Data Query • From the main menu, select "Report," then click "Data Query." • Select the Database (Channel 1~ 8). • Enter Start and End Dates. Check the "Add Time Condition" box and enter Start and End Times if desired. • Enter a Header, Footer, Y and X data, then click Setup. • Click buttons for desired results (print, query, chart options). • To exit the program, click "X" (upper right) at any time. Select Database Fig. 8 C:\PROGRAM FILES\SPER\data\test.
License Information: Your software is licensed for one (1) machine only. You may not transfer this software, nor make copies for distribution to others. You may not reverse engineer, disassemble, translate, or in any way derive from this software any source code. 1 YEAR LIMITED WARRANTY SPER SCIENTIFIC warrants that this software, is free from defects under normal use for a period of one year as evidenced by a receipt from our authorized dealer.
