Instruction Manual

26
SETUP MODE
Temperature Units
To select either Celsius or Fahrenheit temperature scale:
1. Press SET for 2 seconds to enter setup.
2. Press ▲ to select “unit” on the upper display. P7.0 will
appear in the lower portion of the display.
3. Press to enter P7.1. The last selected unit “C” or
“F” will appear on the LCD.
4. Press ▲ to select either display.
5. Press to save the selection and return to P7.0.
6. Press ESC to return to Normal Mode.
Real Time Clock Setting
This procedure adjusts the meter’s internal clock. An
internal battery powers the real time clock independent of
the meter’s power source.
1. Press SET for 2 seconds to enter setup.
2. Press ▲ to select “rtc” on the LCD display. P8.0 appears