Instruction Manual

MEASUREMENT PROCEDURES

2. “MEM” will appear on the LCD. The memory number

and measured value will flash and the meter will return

to Normal Mode.

Note…

Further data can not be saved once the memory is full. See

Clear Memory (page 16) to create additional space.

Recall Memory

This function recalls readings stored in the memory.

1. Press REC for more than 2 seconds to enter Recall

Mode. “REC” will flash on the LCD display.

2. Press ▲ to select the next memory content. Press ▼ to

select the previous memory.

3. Press REC for more than 2 seconds to exit memory

recall and return to Normal Mode.

Note…

All records are retained even when the meter is off. To

clear records, see page 16.