Users Manual Part 4

47
HDE 07.09.2020 732.22.110
10.2 Complete reset
A complete reset resets the furniture lock to the factory settings. All data is cleared. The
furniture lock then has to be reconfigured (
 5. Commissioning, page 33.).
A complete reset is required in the following cases:
• Complete erasing of all data (e.g. in the event of return to stocks / warehouse).
• Resetting of software operation to stand-alone operation (SA).
11. Cleaning and maintenance
11.1 Cleaning
Clean outer surfaces of product if necessary:
• with a dry, soft cotton cloth, or
• with a damp cloth and a little washing-up liquid or neutral cleaner
11.2 Maintenance
The product is maintenance-free apart from having to change the batteries.
Prerequisites:
A tool to actuate the reset button, such as a thin pen/pencil or
opened out paper clip
1. Press the reset button.
A brief acoustic signal is heard.
2. Press and hold the reset button until two long
acoustic signals are heard.
The LED flashes rapidly in green and red.
All data and access rights are cleared.
The lock switches to commissioning mode
(
5. Commissioning, page 33)
2x > 1s
NOTE
Damage to product due to incorrect maintenance
• Do not carry out repairs.
• Do not use lubricants.
• Contact the manufacturer in the event of damage / malfunctions.
• If parts have to be replaced, always use original replacement parts from HÄFELE.
ins-src-732.22.110_EFL.book Seite 47 Donnerstag, 8. Oktober 2020 8:22 08