S Spicer Drive Axles ® Illusstrateed P Parts List Spicer® Drive Axles A Models S135-S & S150-S AXIP--8941 Septem mber 20113 (Supersedes) Marchh 1998
TABLE OF CONTENTS Model Identification Numbering System Axle Identification Components Parts List Bearing Preload Spacers End Yoke Assemblies Housings Kits Spacer Kit Differential Case with Bolts Ring Gear and Pinion Bearing Preload Spacer Bearing and Seal Bearing and Cup Service Carriers Note – Carriers Designed w/ 127591 Seal 1 2 3 4 5 5 5 5‐6 7 8 GENUINE SPICER SERVICE PARTS Should an axle assembly require replacement component parts, it is recommended that Spicer Heavy Axle Service Parts be used.
AX XLE IDENTIFICA ATION All axle assem mblies are identified with twoo tags. One located on the differential carrier, c and thee other locatedd on the right hand h side of thhe axle housingg. JULLIAN DATE C CODE 9 95 170 0 The differenttial carrier tagg contains the following: Dana part number, Julian daate code, and ratio. Optionaal items include customer partt number; line set number, annd the last six digits of the vehhicle serial num mber.
COMPO ONENTS S 32 33 31 30 29 28 16 17 19 15 11 27 26 25 24 18 22 21 2 23 20 14 13 12 2 Optional Noo‐SPIN@ 11 10 6 9 5 4 3 2 34 1 8 7 3
PARTS LIST Item 1 2 3+ Flanged Hex Nut End Yoke Assembly Pinion Oil Seal Note Page 8 4+ 5+ 6 7 Outer Pinion Bearing Cone Outer Pinion Bearing Cup Bearing Preload Spacer Carrier Mounting Bolt – Kit Grade 8, ½” 13 UNC x 1‐3/8” Grade 8, ½” 13 UNC x 2‐1/4” Carrier Sub‐Assembly (Includes Items 5, 9, 13, 16, 17) See Note Page 8 8 1 9+ 10+ 11+ 12 13 14 15 16+ 17+ 18+ 19+ 20+ 21+ 22+ 23+ 24+ 25+ 26+ 27 Inner Pinion Bearing Cup ** Inner Pinion Bearing Cone ** Ring Gear & Pinion Set Adjusting Ring Differentia
BEARIN NG PREL LOAD SP PACERS Thickness Thickness T Inches MM Spicer Part P Number Inches .296 .297 .298 .299 .300 .301 .302 .303 .304 .305 .306 7.52 7.54 7.57 7.59 7.62 7.65 7.67 7.70 7.72 7.75 7.77 360H HS100‐11 360H HS100‐12 360H HS100‐13 360H HS100‐14 360H HS100‐15 360H HS100‐16 360H HS100‐17 360H HS100‐18 360H HS100‐19 360H HS100‐20 .307 .308 .309 .310 M MM Spicer Part Numbber 7.80 7.82 7.85 7.87 360HS100‐22 2 360HS100‐23 3 360HS100‐24 4 360HS100‐25 5 Kit Item SPA ACER KIT T Range .
KITS DIFFERENTIAL CASE WITH BOLTS Ratio Sl35‐S Items Included Sl5O‐S 360KQ100‐X 360KQ100‐X 2.81 thru 3.21 3.38 thru 3.73 360KQ101‐X 360KQ101‐X 3.91 thru 4.44 360KQ102‐X 360KQ102‐X 4.78 thru 5.38 360KQ103‐X * 360KQ103‐X * 360KQ104‐X 360KQ104‐X 6.14 thru 7.17 * Diff Case 360DU110 – which replaced old case # 360DU107 is machined for ABS tone rings & used in these kits. 20, 21 , 28 RING GEAR AND PINION Ratio 2.81 ** 2.93 ** 3.07 3.21 3.38 3.54 3.73 3.91 4.10 4.44 4.78 4.88 5.13 5.38 6.14 6.43 7.
SERVICE CARRIERS S135S / S150S ‐ Standard Carrier 14.25" Hypoid Gearing Side Gear # 029GD104 Side Gear New Carrier Ratio Spline Carrier with ABS 3.38 36 Inv 360CA104‐3X 3.54 36 Inv 360CA104‐4X 3.73 36 Inv 360CA104‐5X 3.91 36 Inv 360CA104‐6X 4.10 36 Inv 360CA104‐7X 4.44 36 Inv 360CA104‐8X 4.78 36 Inv 360CA104‐9X 360CA102‐5X 4.88 36 Inv 360CA104‐17X 360CA102‐1X 5.13 36 Inv 360CA104‐16X 360CA102‐2X 5.38 36 Inv 360CA104‐10X 360CA102‐3X 6.14 36 Inv 360CA104‐11X 6.
NOTE – CARRIERS DESIGNED W/ 127591 SEALS In October 2000, Dana release S150PB carriers for Navistar that incorporated new design pinion seal and yokes. The parts listed below are those items unique to these designs. The carrier’s designs can be recognized by the carrier part numbers. All 360CA107 and 360CA108 carriers are designed this way. Bearing Kit w/127591 seal…………………………….360KS104‐X Pinion Seal …………………………………………………..127591 Carrier Sub Assembly – Parking Brake Opt…..
For sspec‘ing or service assistance, call 1.8800.621.8084 or vissit our website at ww ww.spicerparts.com m D Dana Aftermarket Group G PO Box 321 Toledo, Ohio 43697-0321 W Warehouse Distribuutor: 1.800.621.80884 O OE Dealers: 1.877.7777.5360 w www.spicerparts.coom AX XIP-8941 Printed in U.S.A. Coopyright Dana Limited, 2013. Alll rights reserved. Daana Limited.
