Service Manual: S110 and S130

Differential Carrier Assembly

Remove Differential Carrier

Standard Differentials

1. Block the vehicle.

2. Drain axle lubricant. Remove bottom two (2) cap-

screws.

3. Disconnect driveline.

4. Remove axle shafts. (If used, remove lock washers

and tap

er dowels.)

Do not lie under carrier after fasteners are removed. Use

transm

ission jack to support differential carrier assembly

prior to loosening fasteners.

Do not strike the shaft head with a steel hammer. Do not

use chi

sels or wedges to loosen shaft or dowels.

5. Remove carrier capscrews and washers.

6. Remove differential carrier assembly.

WARNING

CAUTION