Service Manual: S110 and S130

Wheel Differential Assembly

Wheel Differential

Assembl

10. Install inner side gear and thrust washer in differen-

tial case.

11. Start wheel differential shaft in differential

case with

the locking pin hole facing up.

12. Install the first side pinion thrust washer and gear.

Push shaft through washer an

d side pinion.

13. Install second side pinion and thrust washer. Push

shaft

through washer and side pinion until it is flush

to the outside of the case.

14. Make certain the hole in the shaft and case line up

and install the

locking pin.

15. Install outer side gear.

Note: No

thrust washer is used at this location.

16. Lower ring gear onto case assembly aligning the ring

gear caps

crew holes.