Service Manual: S110 and S130

Wheel Differential Assembly

11. Place thrust washer on the side gear. Lubricate both

sides of the thrust washer before installing.

12. Install the side gear and thrust washer in the differ-

ential case.

13. Start the full differential shaf

t into the shaft bores in

the case that does not have a locking pin hole.

14. Install a side pinion and thrust washer

and push the

shaft through the side pinion.

15. Install the side pinion and thrust washer to the other

side of the

full shaft.

16. Install a side pinion and thrust washer on the half

shaft side.

17. Install the half shaft so that the pin is facing

upward

and push it in until it stops.

Side Pinion

and Thrust

Washer

Full

Differential

Shaft

Locking

Pin Holes

Side Pinion

and Thrust

Washer

Side Pinion

and Thrust

Washer

Pin Hole

Facing

Upward

Half

Differential

Shaft