User's Manual

Statement 2017—Class A Notice for FCC
Modifying the equipment without Cisco฀s authorization may result in the equipment no longer complying
with FCC requirements for Class A digital devices. In that event, your right to use the equipment may be
limited by FCC regulations, and you may be required to correct any interference to radio or television
communications at your own expense.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case users will be required to correct the
interference at their own expense.
Warning
Caution
The fasteners you use to mount the unit on a ceiling must be capable of maintaining a minimum pullout
force of 20 lbs (9 kg) and must use all 4 indented holes on the mounting bracket.
Caution
Les attaches que vous utilisez pour installer le châssis au plafond doivent être capables de résister à une
force d'arrachement minimale de 9 kg (20 lb) et doivent utiliser les quatre orifices de montage prévus sur
le support de montage.
Mise en garde
Caution
This product and all interconnected equipment must be installed indoors within the same building, including
the associated LAN connections as defined by Environment A of the IEEE 802.af Standard.
Caution
Conformément à la définition de l'environnement A de la norme IEEE 802.af, ce produit et tout l'équipement
interconnecté, y compris les connexions LAN associées, doivent être installés à l'intérieur d'un même
bâtiment.
Mise en garde
Statement 287—Declaration of Conformity to R&TTE Directive 1999/5/EC for the European Community,
Switzerland, Norway, Iceland and Liechtenstein
This equipment is in compliance with the essential requirements and other relevant provisions of Directive
1999/5/EC.
Note
21