User's Manual

SmartCloud Radio Node - SCRN 200 Hardware Installation Guide
SpiderCloud Wireless, Inc.
13
To install the radio node:
Step 1 With two user-provided screws, attach the mount bracket assembly to a wall or ceiling. The
screw holes are sized for an M4 (#10) screw. Ensure the screws have a snug fit onto the
studs, sheetrock, anchor, or other material you are bolting to:
Figure 9 Attach the Mount Bracket
Step 2 Route the Ethernet cable through the pedestal base cable opening and through the cable
guards. Insert the RJ-45 connector into the Ethernet port as shown in Figure 10:
Figure 10 Route and Terminate the Cable
RJ-45 Connector in Ethernet Port
Cable
Opening
Cable
Guard