Installation Manual

SpiderCloud Radio Node - SCRN-320 Hardware Installation Guide

Completing the Installation

Step 1 Attach a padlock or cable tie wrap into the provided slot to secure the unit to the mount

bracket.

Figure 16 Padlock and Lock Holes

Step 2 The radio node boots up and attempts to connect to the services node. Refer to Boot

Sequence and Services Node Communication on page 20 for more information.

Detaching the Radio Node from the Mount Bracket

To remove the radio node from the bracket assembly

Step 1 If needed, remove the padlock or cable tie wrap securing the radio node.

Step 2 Slide the radio node out of the mount bracket.

Step 3 Detach the RJ-45 clip from the Ethernet port and remove the cable from cable brackets

and cable opening.

The lock in the above figure is shown schematically. The orientation is for illustration

purposes (not accurate) since the bracket is typically wall or ceiling mounted.

Note

DRAFT

SpiderCloud Wireless, Inc. Proprietary and Confidential