Installation Guide
Table Of Contents
- About this Manual
- Product Overview
- Radio Node Models
- Antennas
- Ports
- The Top-Panel LED
- Input Power
- System Specifications
- Compliance
- Radio Specifications
- Select the Radio Node Location
- Installation and Mount Bracket Assembly
- Boot Sequence and Services Node Communication
- Radio Node LED Boot Sequence
- Radio Node LED Management
- The SpiderCloud Documentation Set
SpiderCloud Radio Node - SCRN-330 Hardware Installation Guide
18
If needed, use a fl
at washer between the bracket and screw head to ensure a secure
fastening. Figure 13 shows the 1.25-inch mount bracket.
Figure 13 1.
25-Inch Mount Bracket
Step 2 Insert the RJ-45 connector through the rectangular bracket opening into the Ethernet port
as shown in Figure 14:
Figure 14 Route and Terminate the Cable
Step 3 Insert the radio node into the mount bracket.
SpiderCloud Wireless, Inc. Proprietary and Confidential
DRAFT