Installation Guide
Table Of Contents
- About this Manual
- Product Overview
- Radio Node Models
- Antennas
- System Specifications
- Compliance
- Radio Specifications
- Ports
- The Top-Panel LED
- Input Power
- Select the Radio Node Location
- Installation and Mount Bracket Assembly
- Boot Sequence and Services Node Communication
- Radio Node LED Boot Sequence
- Radio Node LED Management
- The SpiderCloud Documentation Set
- LTE Antenna Patterns
SpiderCloud Radio Node - SCRN-340 Hardware Installation Guide
23
* Refer to the SpiderCloud OS (SCOS) Administrator Guide for information about the locate radio node and
follow IMSI features.
To disable the LED display
Step 1 From the Configuration Mode, issue the set System RadioNode LED DefaultMode
Dark command to disable the LED display:
set System RadioNode LED DefaultMode Dark
Step 2 Issue the show System RadioNode LED command to verify the configuration:
show System RadioNode LED
DefaultMode Dark;
To re-enable the LED display
Step 1 From the Configuration Mode, issue the set System RadioNode LED DefaultMode
Standard command to re-enable the LED display:
set System RadioNode LED DefaultMode Standard
Step 2 Issue the show System RadioNode LED command to verify the configuration:
show System RadioNode LED
DefaultMode Standard;
The SpiderCloud Documentation Set
The SpiderCloud documentation set includes:
•The SpiderCloud System Description provides an overview of how the SpiderCloud system fits
within an operator’s network and in an enterprise, describes key features of the system, and
provides specifications for the services and radio nodes.
•The SpiderCloud Feature Description provides high-level descriptions of the E-RAN system
features, their impact on the product components (services nodes and radio nodes),
manageability considerations, and feature benefits.
•The SpiderCloud OS (SCOS) Administrator Guide provides procedures for configuring the software
environment and internetworking between the services node and radio node devices.
•The SpiderCloud Services Node Hardware Installation Guide provides hardware specifications and
installation instructions.
•The SpiderCloud Radio Node Hardware Installation Guide provides hardware specifications and
installation instructions.
•The E-RAN Deployment Planning Guide provides information about planning and dimensioning E-
RAN systems.
• The SpiderCloud OS (SCOS) CLI User Guide provides an introduction to the key features and
functionalities of the SpiderCloud Command Line Interface (CLI).
Blue: fast flashing Locate radio node enabled* Approximately 1 second on/off cycle
Blue: solid Follow IMSI enabled and that IMSI is
camped on a cell in the radio node*
Off Powered off or LED disabled
Table 7: Radio Node LED Behavior (continued)
LED Status Flash Rate
DRAFT