User Manual

ManualsBrandsSpieltek ManualsComputers100 Series Gaming Chair

Lift

Up/Down

Rotate

Lock

Unlock

100 Series

Gaming Chair

Precautions

A. Seat back

B. Seat base

C. Headrest pillow

D. Lumbar pillow

E. Tilt mechanism

F. Five-star wheel base

G. Casters (×5)

H. Gas lift piston

I. Piston covers

J. Side covers (×2)

K. Hex/Phillips key

Screws

L. M8 (×8)

M. M5 (×2)

Seat-Back Recline Adjustment Chair Tilt Tension Chair Tilt

Armrest Adjustments Chair Height Adjustment

2D Armrest

Parts and Supplies

Adjusting the Chair

Some screws may arrive preinstalled.

•

Make sure this product is intact and that there are no missing parts.

• Do not dismantle the gas lift for any reason.

• Clean the chair with only a soft, dry cloth.

• Make sure everything is secure before use.

• Use the chair on a ﬂat surface only.

• Do not stand on the chair.

•

Do not put your weight only on the seat back while the chair is in a

fully reclined position.

• Do not sit close to the front of the chair—sit all the way back.

•

Do not let anyone press down on the seat back while the chair is in

a fully reclined position.

•

Be careful when operating the seat back’s reclining mechanism. The

seat back quickly returns to its upright position when the reclining

mechanism is released. Keep any body parts away from the seat

back’s range of motion while adjusting the reclining mechanism.

• Do not seat more than one person at a time in this chair.

• All images are for illustrative purposes only.

E F

G H J

K L M

Summary of content (2 pages)

PAGE 1
00 Series Gaming Chair Precautions • Make sure this product is intact and that there are no missing parts. • Do not sit close to the front of the chair—sit all the way back. • Do not dismantle the gas lift for any reason. • Do not let anyone press down on the seat back while the chair is in a fully reclined position. • Clean the chair with only a soft, dry cloth. • • Make sure everything is secure before use. • Use the chair on a flat surface only.
PAGE 2
100 Series Gaming Chair Assembly Instructions To avoid scratching, lay down a towel or other soft material where you’re going to assemble the chair. It may be necessary to remove the preinstalled screws before assembling some parts of the chair. We recommend two people assembling the chair. Fig. 1 Fig. 2 L 1. Place the seat base flat on a soft surface. 2. Align the seat back with the brackets attached to the seat base. Make sure the brackets are pointing up at 90°.