User's Manual

ManualsBrandsSpieltek ManualsChairs & Stools400 Series Gaming Chair

Lift

Up/Down

Rotate

Forward/

Backward

Lock

Unlock

Lock/

Unlock

Lift

Up/Down

Rotate

Forward/

Backward

Inward/

Outward

200 / 300 / 400 Series

Gaming Chair

Precautions

A. Seat back

B. Seat base

C. Pillow set

D. Tilt mechanism

E. Five-star wheel base

F. Casters × 5

G. Gas lift piston

H. Piston cover

I. Side covers × 2

J. Hex key × 2 (M8)(M6)

K. M8 screw × 16

L. M6 screw × 2

M. Gloves

Seat-Back Tilt Adjustment Chair Tilt Tension Chair Tilt

Armrest Adjustments Chair Height Adjustment

3D Armrest 4D Armrest Single-Arm Mechanism Dual-Arm Mechanism

Single-Arm Mechanism Dual-Arm Mechanism

Parts and Supplies

Adjusting the Chair

Some screws may arrive preinstalled.

•

Make sure this product is intact and that there are no missing parts.

• Do not dismantle the gas lift for any reason.

• Clean the chair with only a soft, dry cloth.

• Make sure everything is secure before use.

• Use the chair on a ﬂat surface only.

• Do not stand on the chair.

• Do not sit close to the front of the chair—sit all the way back.

•

Do not put your weight only on the backrest while the chair is in a

fully reclined position.

• Do not let anyone press down on the backrest while the chair is in a

fully reclined position.

• Do not seat more than one person at a time in this chair.

• All images are for illustrative purposes only.

G I

Summary of content (2 pages)

PAGE 1
200 / 300 / 400 Series Gaming Chair Precautions • Make sure this product is intact and that there are no missing parts. • Do not sit close to the front of the chair—sit all the way back. • Do not dismantle the gas lift for any reason. • Do not put your weight only on the backrest while the chair is in a fully reclined position. • Clean the chair with only a soft, dry cloth. • • Make sure everything is secure before use.
PAGE 2
00 / 300 / 400 Series Gaming Chair Assembly Instructions To avoid scratching, lay down a towel or other soft material where you’re going to assemble the chair. It is necessary to remove the preinstalled screws before assembling some parts of the chair. We recommend assembling the chair with two people. Fig. 1 Fig. 2 K 1. Place the seat base flat on a soft surface. 2. Align the seat back with the seat-back brackets attached to the seat base. Make sure the brackets are pointing up at 90°.