User's Manual

TNSDeviceOverview

The TNS device connects to the lead(s) via the Connector Cable. The TNS is worn by the patient for up

to 30 days during the trial period. The TNS device has a clip to attach the device to clothing or a belt

during the trial period.

The TNS device must be programmed by the physician or com-

pany representative using a Clinical Programmer prior to use.

The TNS device will periodically check for communication from

the Patient Programmer. Using the Patient Programmer, stimu-

lation can be started by selecting a body region to receive stimu-

lation. The level of stimulation can be adjusted, and the stimula-

tion can be turned OFF. For detailed instructions on the use of

the Patient Programmer, see the Patient Programmer Manual.

TIMULATION OFF SWITCH

The TNS device has a button with a red marking located

on the top of the TNS device. This button may be used to turn

OFF stimulation on all leads, by pressing it for more than 2

seconds. A Programmer is required to turn stimulation back on.

MAGNET ACTIVATION

Move the magnet located in the Programmer in a circular motion over

the top of the TNS to connect to the Patient Programmer or the Clinical

Programmer.

TNS DEVICE CARE

Tell the patient not to immerse their TNS device in water or pour water

over it. If cleaning is necessary, remove soil with a soft damp cloth.

Magnet Location