User's Manual

SpinalModulation,Inc. PhysicianImplantManual
28
place,willassistthisprocess.
LeadAnchoringPercutaneousLeadTrial
1. After placing a Trial lead in its final position, it should be secured using a lead anchor on
theskin.
2. Carefully slide the lead anchor over the proximal end of the Trial Lea d and advance it to
thepuncturesite.Theshortendofthesutureanchormustbefacingtowardstheincision.
3. Applysuturesaroundtheanchorand cinchontotheTrialLeadasshownbelow.Applyat
leasttwotiestothemainbodyandonetietotheleg.
WARNING:Donotsuturedirectlyontothelead, asthereisariskofdamagingthelead. 
Failuretosecure theleadtothe skin,orothertissue,mayresultinleadmigrationand/or
motoractivationorpainfulstimulation.
WARNING:Failure to comply to the anchoring technique may re s u lt in lead migration
and/ormotoractivationorpainfulstimulation.
4. Applyanantibacterialagenttothepuncturesite,ifdesired
5. Reconnect the connector cable to the leads and coil any excess Trial Lead length around
thedistalendofthe ConnectorCable ,foldagauzepadaroundtheblock,andapplyalarge
adhesive patch over the area containing the Trial Lead(s), puncture site and Connector
Cable.
6. VerifytheconnectionoftheConnectorCabletothe TrialLeadsandtheexternalTNSprior
todischargeofthepatient.
NeurostimulationTrial–PercutaneousLeadTrial
1. Using the Clinical Programmer, program the TNS with the neurostimulation trial