Operation Manual

CONTENTS:

1 x Pimple Pete Head

1 x Spinner Base

18 x Pimples

1 x Mega-Zit Plunger

ASSEMBLY

1. Assemble Pimple Pete

Snap Head into Base.

2. Load Pimples

A. Randomly push tail of Pimples through the front of the face.

B. Pull the tail of the Pimples from the back of the face.

Place any extra Pimples back in the box.

C. The Pimples should look like this.

3. Fill Mega-Zit Plunger

4. Installing Mega-Zit Plunger

Pull back the Plunger Holder

until it locks in place.

Insert tip in water. Pull Plunger to

draw in water to

the Fill Line.

Insert Plunger into the

Plunger Holder.

Press the Plunger Lock Release

Button when ready to play.

NOTE: After pressing the Plunger Lock

Release Button, the Mega-Zit is ready for play.

Too much movement may cause it to burst.

Plunger Lock

Release Button

Plunger Holder

Fill Line

A B

Click!

WARNING:

CHOKING HAZARD

— Small parts.

Not for children under 3 years.

PLAYERS

AGE

http://spinmastergames.com/pimplepete

For more instructions go to

PAGE 1
AGE 5+ CONTENTS: 1 x Pimple Pete Head 1 x Spinner Base 18 x Pimples 1 x Mega-Zit Plunger 2+ PLAYERS WARNING: ! CHOKING HAZARD — Small parts. Not for children under 3 years. For more instructions go to http://spinmastergames.com/pimplepete ASSEMBLY 1. Assemble Pimple Pete Snap Head into Base. 2. Load Pimples A. Randomly push tail of Pimples through the front of the face. A B B. Pull the tail of the Pimples from the back of the face. Place any extra Pimples back in the box. C.
PAGE 2
COMPETITIVE PLAY: 2-4 Players Object: “Pop” the pimples without bursting the Mega-Zit. The first player to score the winning Pimple Point total is the Pimple Pete champion! (See Scoring and Winning the Game below.) Pimple Popping Rules: With Pimple Pete, “popping” a pimple means grabbing a pimple and pulling it out of Pete’s face. • You can only use one hand to “pop” the pimples.