Operation Manual

[2]
[1]
HOW TO SET THE TIME
1. Pull out the crown to position [2].
2. Turn the crown to set hour and minute hands.
3. Push the crown back into position [1].
WINDING THE MAINSPRING
Automatic winding watch can also be hand winded by turning the
crown in position
[1].
Wind 15-20 times and it will start to move naturally after shaking
slightly.
* This watch MUST be worn for at least 8 (Eight) hours each day to ensure it is
fully wound. An automatic watch will only wind when the watch is on your wrist
and your arm moves. Winding the watch by the crown will put power on the
spring but not enough to allow the watch to function fully. If your watch stops
overnight or loses time it means it is not being fully wound.