SPNYL02-x DATASHEET SPINTLY SPNYL02-X High Efficiency 2.4GHz Wireless Module SPNYL02-P and SPNYL02-E Datasheet NAME: 2.4GHz Wireless IOT Module MODEL NO: SPNYL02-P/SPNYL02-E VERSION: P01 www.spintly.
SPNYL02-x DATASHEET CONTENTS Table of Contents 1. Product Description ...................................................................................................................................... 4 2. Key Features.................................................................................................................................................. 4 3. Applications ............................................................................................................................
SPNYL02-x DATASHEET • RF exposure considerations ...................................................................................................................... 20 • Antennas.................................................................................................................................................. 21 • Label and Compliance information ...........................................................................................................
SPNYL02-x DATASHEET 1. Product Description SPNYL02 series is a powerful, highly flexible, ultra-low power wireless module using Nordic nRF52840 SoCs made for IOT applications. It was designed for high data rate wireless communication in the 2.4GHz ISM band. With an 32bit ARM® Cortex M4 MCU with a floating-point unit, available 1MB flash, 256KB RAM, embedded 2.4GHz multi-protocol transceiver.
SPNYL02-x DATASHEET • Advanced wearables • Health/fitness sensor and monitor devices • Wireless payment enabled devices • Advanced computer peripherals and I/O devices • Mouse • Keyboard • Multi-touch trackpad • Interactive entertainment devices • Remote controls • Gaming controllers 4. Module Block Diagram Figure 1: SPNYL02 Block diagram www.spintly.
SPNYL02-x DATASHEET 5.
SPNYL02-x DATASHEET Package PCB material Impedance Hardware CPU Memory Interfaces Power supply Operating temperature range Clock control Power regulator Certifications USA (FCC) Europe (CE) www.spintly.com Height: 2.3mm+0.1mm/-0.
SPNYL02-x DATASHEET 6 Module Pinout and Pin Description 6.1 Module Pinout Figure 2: SPNYL01 Module Pinout www.spintly.
SPNYL02-x DATASHEET 6.2 Pin Assignment Module Pin Number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Module Pin Name Description P0.03 AIN1 P0.02 AIN0 P0.28 AIN4 P0.29 AIN5 P0.30 AIN6 P0.31 AIN7 P0.07 P0.05 AIN3 VDD GND P0.27 P0.26 P0.04 AIN2 P0.06 P0.11 TRACEDATA [2] P0.08 P0.09 NFC1 P0.10 NFC2 SWDCLK SWDIO P0.12 TRACEDATA [1] P0.13 P0.14 P0.15 P0.16 P0.17 P0.18 nRESET P0.19 General Purpose I/O SAADC/COMP/LPCOMP input General Purpose I/O SAADC/COMP/LPCOMP input www.
SPNYL02-x DATASHEET 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 P0.20 P0.21 P0.22 P0.23 P0.24 P0.25 P1.10 P1.11 P1.12 P1.13 GND P1.14 P1.15 VDDH GND P1.08 P1.09 TRACEDATA [3] VBUS DD+ P1.00 TRACEDATA[0]/ SWO P1.01 P1.02 P1.03 P1.04 P1.05 P1.06 P1.07 www.spintly.
SPNYL02-x DATASHEET 7. PCB Design Guide 7.1 Layout notes You can refer to the following references for the mounting design of the module with on-board antenna (SPNYL02-P with PCB antenna). For external antenna modules (SPNYL02-E needs to connect an external antenna to the u.FL connector), you need to refer to the external antenna design requirements.
SPNYL02-x DATASHEET • For main board layout: • Avoid running any signal line below module whenever possible. • No ground plane below antenna. • If possible, cut-off the portion of main board below antenna. Wireless module Wireless module Wireless module www.spintly.
SPNYL02-x DATASHEET Placement of metal parts: • Minimum safe distance for metal parts without seriously compromising the antenna (tuning) is 40 mm top/bottom and 30 mm left or right. • Metal close to the module antenna (bottom, top, left, right, any direction) will have degradation on the antenna performance. The amount of that degradation is entirely system dependent, meaning you will need to perform some testing with your host application.
SPNYL02-x DATASHEET 9. PCB Footprint and Dimensions Figure 7: SPNYL02 PCB Footprint and Dimensions www.spintly.
SPNYL02-x DATASHEET 10. Qualification and approvals 10.1. United States (FCC) The SPNYL02-X has received Federal Communications Commission (FCC) CFR47 Telecommunications, Part 15 Subpart C “Intentional Radiators” modular approval in accordance with Part 15.247 Modular Transmitter approval.
SPNYL02-x DATASHEET 10.2.1. Radio Equipment Directive (RED) 2014/53/EU The SPNYL02-X module complies with the essential requirements and other relevant provisions of Radio Equipment Directive (RED) 2014/53/EU. 10.2.2. Labelling and user information requirements The label on the final products which contain the SPNYL02-X module must follow CE marking requirements. The “R&TTE Compliance 10. Cautions 10.1 Reflow soldering Reflow soldering is a vitally important step in the SMT process.
SPNYL02-x DATASHEET Note: The module is LGA package. Please be careful of the amount of solder paste. The module may be lifted due to excess solder. 10.2 Usage Condition Notes • Follow the conditions written in this specification, especially the recommended condition ratings about the power supply applied to this product. • The supply voltage has to be free of AC ripple voltage (for example from a battery or a low noise regulator output).
SPNYL02-x DATASHEET 10.3 Storage Notes • The module should not be stressed mechanically during storage. • Do not store these products in the following conditions or the performance characteristics of the product, such as RF performance will be adversely affected: • • • • Storage in salty air or in an environment with a high concentration of corrosive gas. Storage in direct sunlight Storage in an environment where the temperature may be outside the range specified.
SPNYL02-x DATASHEET 11. Package information Details Quantity(module) Single module Weight Dimension Tape and Reel 400 pcs 45.0g 23 x 16.5 x 3.2 mm (L x W x H) 12. Ordering information Model No Module SoC Flash/RAM SPNYL02-P nRF52840-QIAA 1MB/256KB SPNYL02-E nRF52840-QIAA 1MB/256KB Revision History Revision Description Author Date V1.0 Initial Release Brosnan 01-11-2022 www.spintly.
SPNYL02-x DATASHEET • Antennas The Bluetooth Low Energy Module is an BLE Module beams signals and communicates with its antenna, which is PCB Antenna and External 2.4Ghz antenna. Antenna could not be in no-load state when module is working. During debugging, it is suggested to add 50 ohms load to the antenna port to avoid damage or performance degradation of the module under long-time no-load condition. BLE Antenna Designation: PCB antenna For Model SPNYL02-P BLE Antenna Gain: 0.
SPNYL02-x DATASHEET • Antennas The SPNYL02-X is an BLE Module beams signals and communicates with its antenna, which is PCB Antenna and External 2.4Ghz FPC antenna. Antenna could not be in no load state when module is working.
SPNYL02-x DATASHEET 3) For all products market in US, OEM has to limit the operation channels in CH1 to CH11 for 2.4G band by supplied firmware programming tool. OEM shall not supply any tool or info to the end‐user regarding to Regulatory Domain change. • USERS MANUAL OF THE END PRODUCT: In the user manual of the end product, the end user has to be informed to keep at least 20cm separation with the antenna while this end product is installed and operated.
SPNYL02-x DATASHEET DECLARATION: The contents of this datasheet are subject to change without prior notice for further improvement. Spintly team reserves all the rights for the final explanation. Please contact Spintly sales team or visit https://www.spintly.com to get more related information if needed. Contact Information SPINTLY Website: www.spintly.com sales@spintly.com Address: G1, Vaz Appts, Fatorda, Salcette, Goa 403602 Contact: +91 8766812888 www.spintly.
