User's Manual
Table Of Contents
- 1: Introduction
- 1.1 Documentation notes
- 1.2 Product introduction
- 1.3 General product handling and operation
- 1.3.1 Powering on/off and sleep mode
- 1.3.2 Attaching, detaching, and handling modules
- 1.3.3 Attaching the Wi-Fi antenna
- 1.3.4 Attaching the strap
- 1.3.5 About the touchscreen display
- 1.3.6 Selecting the active interface
- 1.3.7 Starting a function or test
- 1.3.8 Stopping a test
- 1.3.9 Saving results
- 1.3.10 Interpreting results
- 1.4 Maintenance
- 1.5 Technical support
- 2: Wi-Fi Testing Menu
- 3: 10/100 Testing Menu
- 4: System Menu
- 5: IP and Video Testing
- 5.1 IP Network Setup
- 5.2 Connection Information
- 5.3 Ping
- 5.4 Traceroute
- 5.5 Web Browser
- 5.6 IP Video testing
- 6: Specifications
Tech-X Flex™ Base Unit User Guide Issue 1
4: System Menu 4-3
Intro
Wi-Fi
10/100
System
IP/Video
Specs
Currently, this function is used as a prerequisite for management activities such as firmware upgrades
and channel guide imports. It does not provide general access to the operating system of the unit. For
more information on firmware upgrades, see Update Firmware on page 4-10.
4.3 Set Date and Time
Select System > Set Date And Time.
The date and time are used to timestamp all saved results in the Record manager. They are also used for
various internal functions, described in this document elsewhere as appropriate.
The date and time must be entered using the following formats:
• Date - YYYY-MM-DD
• Time - HH:MM:SS
To set the date or time, select either parameter and press a number on the keypad to initiate the numeric
entry screen. You must enter all characters that are requested, using leading zeros as necessary to pad
empty spaces. For example:
09:10:00
...would set the time to 9:10 a.m. Note that the unit uses 24 hour time. For example, 9:10 p.m. would be
set as 21:10:00.
Figure 4-2 Setting the date and time