User's Manual

Tech-X Flex™ Base Unit User Guide Issue 1
4: System Menu 4-9
Intro
Wi-Fi
10/100
System
IP/Video
Specs
4. On the unit, click Start to initiate the import.
If the import is successful, you can select System > Channel Guide/Network Setup and verify the
import by looking at the list in the Guide Name field.
If the import fails, check the FTP server setup and the network connection between the unit and the
host computer. Either device should be able to ping the other.
4.8 Download Channel Guide
Select System > Download Channel Guide.
For more information on importing channel guides to the unit, see Importing channel guides to the unit on
page 4-7.
4.9 Wireless ON/OFF
Select System > Wireless ON/OFF.
If set to ON, this setting causes the following to occur:
• When the unit is powered up, a Wi-Fi connection is automatically attempted, based on the internal list
of auto-connect networks. For details on how auto-connection works, see About the connection
history and “auto-connect” networks on page 2-4.
• The current Wi-Fi connection remains active while other menus and interfaces are in use. If the auto-
connection was successful, it is immediately available for use and remains active as long as the unit
is within range.
If set to OFF, the Wi-Fi interface can still be used for testing; however, its general behavior is identical to
other interfaces. For more information, see Selecting the active interface on page 1-13.
Server The IP address or DNS name of the host computer where the FTP server application
is running.
Port The port on which the FTP server is listening for requests. The default is 21 but can
be changed in the FTP server setup.
User ID The name of the user account that you set up in the previous procedure.
Password The password of the user account, if one was specified.