User's Manual
Table Of Contents
- 1: Introduction
- 1.1 Documentation notes
- 1.2 Product introduction
- 1.3 General product handling and operation
- 1.3.1 Powering on/off and sleep mode
- 1.3.2 Attaching, detaching, and handling modules
- 1.3.3 Attaching the Wi-Fi antenna
- 1.3.4 Attaching the strap
- 1.3.5 About the touchscreen display
- 1.3.6 Selecting the active interface
- 1.3.7 Starting a function or test
- 1.3.8 Stopping a test
- 1.3.9 Saving results
- 1.3.10 Interpreting results
- 1.4 Maintenance
- 1.5 Technical support
- 2: Wi-Fi Testing Menu
- 3: 10/100 Testing Menu
- 4: System Menu
- 5: IP and Video Testing
- 5.1 IP Network Setup
- 5.2 Connection Information
- 5.3 Ping
- 5.4 Traceroute
- 5.5 Web Browser
- 5.6 IP Video testing
- 6: Specifications
Tech-X Flex™ Base Unit User Guide Issue 1
5: IP and Video Testing 5-5
Intro
Wi-Fi
10/100
System
IP/Video
Specs
Figure 5-2 Successful Ping results
5.4 Traceroute
This test is the standard ICMP traceroute function that sends three traceroute requests to a destination
address and reports every router “hop” along the path, up to 30 hops. The results provides a topological
view of the route that the packets used to reach the destination.
The request is sent via the active interface and requires that routable IP information is assigned to that
interface. For more information, see IP Network Setup on page 5-1.
5.4.1 Setup - Traceroute test
Table 5-4 Traceroute - Setup parameters
Parameters Description
Destination IP
Address
Target address for the traceroute request, either a dotted IP address or a URL if
a DNS is available. For example:
208.22.58.142
www.google.com