Safety Notes

SpiritRS Telemetry

Spirit RS is equipped with 2 separate inputs for JETI model sensors. These sensors are completely compatible

and can be used in the same way as with REX-line receivers.

If you will need to connect more sensors, you can use JETI model EXPANDER. So you are able to virtually

connect up to 8 telemetry sensors at the same time.

Available telemetry ports:

EXT

By default both are configured as JETIBOX/Sensor which mean you do not have to do any other adjustments,

just connect the sensors.

Spirit RS is equipped also with E2 port. In the future this port can be used in case Spirit RS will act as a

standalone receiver. No sensor for Spirit RS can be connected there.

Contents

1 Telemetry Sensor Wiring

1.1 E1 port

1.2 EXT port

2 Telemetry Sensor Data

3 Spirit Telemetry

3.1 List of supported ESCs