Safety Notes

SpiritRS Binding
1 Binding Procedure
In order to Bind Spirit RS with your radio use supplied Bind plug.
1. Insert Bind plug in the SYS port and connect Power supply to the Spirit unit. (For example ESC/BEC at
the THR port)
2. Spirit unit will start to blink with the Status LED periodically.
3. Then power up your radio.
4. Radio will ask if you wish to use the receiver. Confirm by pressing Yes button.
1.1 Not recognized by radio
In case you already bound a receiver or Spirit RS with selected Model profile, you might need to start Binding
process again.
Go to Model/Heli Tuning and press middle button under display. Then select Pair primary module.