Operation Manual

6
Fitness Bike
XBU55
1. Unravel the Computer Cable (29) and snake it through the Console Mast Cover (38) and the Console Mast
(2) until the cable connector comes out the top opening of the console mast. Slide the plastic cover (38) onto
the console mast, ensuring the correct orientation of the cover.
2. Install the Console Mast (2) onto the Main Frame (1) with seven Hex Head Bolts (51), six Flat Washers (72)
on the side bolts and one Curved Washer (99) on the front bolt. Tighten using the Wrench (100).
HARDWARE
STEP 2: Console Mast
#51. 5/16” x 5/8”
Hex Head Bolt
(7 pcs)
#72. 5/16” x 18 x 1.5T
Flat Washer
(6 pcs)
#99. 5/16” x 19 x 1.5T
Curved Washer
(1 pc)