Product Overview

CLEAN SYSTEM WATER THROUGHOUT THE LIFE OF THE INSTALLATION
The life and e ciency of a large volume fl uid
system is greatly dependent on clean system
water. Dirt can cause many problems, such
as increased component wear and frequent
breakdowns. Reduced e ciency, corrosion,
pump and control valve wear result in
increased maintenance, unnecessary costs and
dissatisfi ed customers. Traditionally, strainers
or fi lters which operate under high pressure
losses are installed in a sidestream to deal
with dirt problems. However, these require
frequent maintenance and, if not cleaned on a
regular basis, cause even lower fl ow rates and,
eventually, blockages.
There is a solution!
A large volume fl uid system without dirt is
possible! There is a unique device which will
remove dirt down to the smallest particle. It
works continuously and is low-maintenance.
Less maintenance, fewer costs, satisfi ed owners!
The name:
SPIROTRAP HV
THE KEY DIFFERENCE
The unique construction of the Spirotrap HV allows for the removal
of dirt particles of all sizes. The Spirotube®, the core of the Spirotrap
HV, creates a low velocity area, which forces the dirt particles to sink
to the dirt collection chamber at the bottom of the unit. Because the
dirt is collected outside the main fl ow, blockages do not occur, and the
Spirotrap HV’s pressure drop remains constant.
While the large dirt collection chamber
ensures infrequent fl ushing, the system
can remain fully operational when
fl ushing is necessary.
4” Drain
4” Dirt
Lifting eyes make installation
easy.
Welded steel construction
guarantees long life.
The unique Spirotube is the
core of the Spirotrap HV.
Designed to trap the smallest
dirt particle, yet it o ers little
resistance to fl ow.
Flanged connections
The extended lower column
allows for greater velocities in
full-fl ow applications.
Large capacity collection
chamber reduces the need
for frequent draining.
Drain valve for fl ushing out
the dirt.
THE ULTIMATE IN DISTRIBUTION EFFICIENCY