Datasheet

Op al onze offertes, overeenkomsten en de daaruit voortvloeiende verbintenissen zijn onze Algemene Voorwaarden van
toepassing als gedeponeerd bij de kamer van Koophandel Oost-Nederland op 1 maart 2009 onder nummer 08179628. Powered by
G&G Trading International B.V.
Industrieweg 18-9
3846 BD Harderwijk
Tel.[phone]
Fax[phone]
www.spita.eu
Rabobank rek.nr.: 13.73.22.828
K.v.K. Oost Nederland: 08179628
BTW/VATnr.: NL-8197.70.115.B.01
SPITA ResQ-tape
specifications
Properties
Test method / Norm*
Test results**
Operating temperature
Continue
-60° C up to 260° C
Temperature range
Average
-65° C up to 260° C
Cold brittle point
ASTM D-2137
-65° C
Durometer hardness
Shore Durometer 50-60
58 (24 h room temperature)
Specific Gravity
1.11 – 1.17
1.15
Modulus @ 100%, psi
Continue
203
Tensile strength
ASTM D-412 (950 psi)
1412 psi (97 Bar)
Ultimate elongation
ASTM D-412 (300%)
453% average
Tear resistance
ASTM D-412
5,86 Bar
Pressure resistance
Average
11,5 Bar
Water absorption
Fed.Std601 (3% max)
0,18% average
Dielectric strength
ASTM D-419 (400 per mil)
644 per mil
* The values (when stated) are the minimum requirements to pass the test.
** The results are coming from two leading test institutes (SGS - USA and TüV TNO - The
Netherlands). The test reports are available on request.
Available colours 1” rolls (25,4mm x 3,65m x 0,5mm):
black, red, clear, white, blue, green, yellow, brown, orange, grey
Available colours 2” rolls (50,8mm x 3,65m x 0,5mm):
black, red, clear, white, blue, green, yellow, brown, orange, grey