User Manual

12
2Control
Rear Panel/Switches & Connections
115V: Fuse 315mA slow
230V: Fuse 630mA slow
Sound Performance Lab
2Control– Model 2860
soundperformancelab.com
MADE IN GERMANY
AVIS: RISQUE DE CHOC ÉLECTRIQUE - NE PAS OUVRIR
WARNING: DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE. THIS EQUIPMENT MUST BE EARTHED.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
L R
R L
L RSP 1
R
IN 1
SP 1
IN 1 L
R L
L RSP 2
SP 2
MAINS INPUT
SERIAL NUMBER
GND LIFT XLR-WIRING
Pin 1 = GND
Pin 2 = (+) hot
Pin 3 = (–) cold
Connect Pin 3 to
GND for unbal.
operation.
SP 3
Full Range Mono Output.
To Sub or Mono Speaker
L R
R
IN 2
IN 2 L
+4 dBu
-10 dBV
230
SP 3
VOLTAGE | FUSE
Electrical
Power
Power
Switch
GND Lift
Switch
Input
Sensitivity
Voltage Selector
The rear panel VOLTAGE SELECTOR serves to let you switch to the
local line voltage standard (115 V position: 110-120 volts/6o Hz, 230 V
position: 220-240 volts/50 Hz). The diagram above shows the correct
switch position for 230 V power supply.
BEFORE you connect electrical power make sure that the VOLTAGE
SELECTOR setting reflects the correct local power line voltage!