User Manual

DynaMaxx
20
Specifications
Input & Output
Instrumentation amplifier, electronically balanced
(differential),transformerless
Nominal input level ......................................... +6 dB
Input impedance.............................................. = 22 kOhms
Output impedance .......................................... < 600 Ohms
Max. input level ................................................. +24 dBu
Max. output level .............................................. +22,4 dBu
Minimum load ohms ...................................... 600 Ohms
Relay Hard Bypass ............................................ yes
Power Fail Safety............................................... yes
Measurements
Frequency response........................................ 20 Hz - 100 kHz
(100 kHz = -3 dB)
CCMR (common mode rejection) ............... > 80 dBu @ 1kHz
THD & N ............................................................... 0,002% @ 1kHz
S/N CCIR 468-3.................................................. -89 dBu
S/N A-weightened .......................................... -105 dBu
Power Supply
Torroidal transformer ..................................... 15 VA
Fuse ....................................................................... 315 mA
Ground-Lift switch ........................................... yes
Voltage selector ................................................ yes
Dimensions
Housing................................................................ Standard EIA 19"/1U,
482 x 44 x 237 mm
Weight ................................................................. 3,4 kg
Note:0 dBu = 0.775 V
Subject to change without notice.