Manual

8
Cabling: Rear Side
56
230
1. Remove Fuse Holder
2. Exchange Fuses
3. Flip Over
4. Reinstall
GND LIFT
GND LIFT
FUSES
VOLTAGE SELEC T
GND LIFT
GND
115V:
T 2 A L 250V
230V:
T 1 A L 250V
LR
RL
INPUTS
INPUTS
MIDSIDE
SIDEMID
SENDS
SENDS
MIDSIDE
SIDEMID
RETURNS
RETURNS
LR
RL
OUTPUTS
OUTPUTS
MADE IN GERMANY
Gemini
Model 1720
Serial
Number
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
RISQUE DE CHOC ÉLECTRIQUE
NE PAS OUVRIR
ATTENTION
~115 V AC/~230 V AC; 50 Hz/60 Hz; P max. 60 W
1 Inputs
Gemini provides two balanced inputs labeled as Inputs. These are female XLR jacks.
Connect the stereo signal, which is supposed to be processed with the Gemini, to these
inputs. Connect the left channel to INPUL L and the right channel to INPUT R.
2 Sends
Through both unbalanced output jacks, XLR male, Gemini sends the signal to a device or a
collection of devices, with whom the signal can be processed. Connect the left channel to
SEND MID and the right channel to SEND SIDE.
1 Inputs
2 Sends
3 Returns
4 Outputs
5 Ground-Lift (see details on page 7)
6 Voltage (see details on page 6)