User Manual

12
Transpressor
Overview
Operation
Overview
The control elements on the front panel of the Transpressor are divided into four sections:
Transient Designer, Twin Core Compressor, Parallel Mix and Push Buttons.
1. The Transient Designer is very appealing due to the simpleness in its concept of dynamic
waveform shaping. With only two controls you can shape the attack and decay of a signal.
2. In the Twin Core Compressor section there are five controls that correspond to the classic
compressor parameters: Threshold, Ratio, Attack, Release, and Make Up.
3. The PARALLEL MIX function is located in a separate section due to its importance. Use
this function to determine the ratio between the dry (original) and wet (processed)
signal.
4. The Push Buttons section allows you to engage or disengage several functions: the
Transient Designer and Twin Core Compressor modules, the Link function, and the SLAVE
mode.