User Manual

22
Transpressor
Specifications
Inputs & Outputs
Electronically balanced instrumentation amplifiers
Sockets Inputs: XLR and 1/4" stereo jacks (TRS)
Side chain input: 1/4“ mono jacks (TS)
Outputs: XLR and 1/4" stereo jacks (TRS)
Stereo Link/Slave: RJ 45, for 568 A cable
Input impedance 10 kOhm balanced/5 kOhm unbalanced
Side chain: ca. 80 kOhm
Output impedance 150 Ohm balanced/75 Ohm unbalanced
Nominal input level +4 dBu/-10 dBV
Maximum input level 20,5 dBu @ sensitivity +4 dBu
13,2 dBu @ sensitivity -10 dBV
Maximum output level 21 dBu
Measurements
Frequency response (-3 dB) 10 Hz - › 200 kHz
Common mode rejection › 60 dB
(@1 kHz, 0 dBu input level and unity gain)
Total harmonic distortion Transient Designer: 0,004
Twin Core Compressor: 0,005
(in %, @ 1 kHz, 0 dBu input level and unity gain)
Signal to noise ratio (A-bewertet) Transient Designer: -96,4 dB
Twin Core Compressor: -96,5 dB
Overall: 94,6 dB
Dynamic range (unweighted) Transient Designer: 114,5 dB
Twin Core Compressor: 114,5 dB
Overall: 112,5 dB
Filter
Low pass 1 100 Hz, 18 dB/Octave
Low pass 2 540 Hz,18 dB/Octave
Band pass 800 Hz-3,1 kHz, 12 dB/Octave
Power Supply
toroidal transformer
Fuses 230 V AC, 50 Hz: 315 mA
120 V AC, 60 Hz: 630 mA
Voltage selector 115V/230V
Power consumption 19 VA
Measurements and Weight
Housing (W x H x D) 482 x 88 x 239 mm
Depth including controls and sockets 263 mm
Weight 3,8 kg
Note: 0 dBu = 0,775 V. Specifications subject to change without notice.