Brochure

For Refrigerants 22, 134a, 404A, 507
SAE Flare & ODF Solder Connections
BULLETIN 10-10 — Page 15
t TYPE F & EF
Type
F
Sporlan Type F with SAE flare connections or
Type EF with ODF solder connections are small
brass bar body valves with identical internal
construction and replaceable thermostatic ele-
ments. The Type F valve has a removable 100
mesh strainer as a standard feature. The Type
EF has a 60 x 50 mesh insert strainer. These
valves are designed for small refrigeration sys-
tems such as refrigerated cases, coolers, and
freezers where space is limited and an external
adjustment is desired.
Outlet Connections
3/8” SAE, 1/2” SAE, 3/8” ODF, 1/2” ODF
Mating Distributors (See Bulletin 20-10)
D260, D262, 1603, 1605, 1606, 1608, 1650(R)
For complete details of construction, see page 35.
Q The 3/8” SAE inlet fitting has a long taper on the flare surface. A 3/8” x 1/4” reducing flare nut will allow 1/4” OD tubing to be attached to this fitting.
W ODF Solder on Type EF valves indicates a female connection on the valve of proper diameter to receive copper tubing of corresponding OD size. Thus 1/2” ODF will receive 1/2” OD tubing.
E Nominal 1 ton and larger F valves for R-134a, R-404A and R-507 type refrigerants, and nominal 1-1/2 ton and larger for R-22 refrigerant require 3/8” SAE Flare or 3/8” ODF inlet, minimum.
Type
EF
REFRIGERANT
(Sporlan Code)
TYPE F TYPE EF
NOMINAL
CAPACITY
Tons of
Refrigeration
THERMOSTATIC
CHARGES
AVAILABLE
STANDARD
TUBING
LENGTH
CONNECTIONS - Inches
SAE Flare /
W ODF Solder
Blue figures are standard and
will be furnished unless
otherwise specified.
NET
WEIGHT
SHIPPING
WEIGHT
SAE Flare ODF Solder
Internal
Equalizer
External
Equalizer
Internal
Equalizer
External
Equalizer
INLET OUTLET
22 (V)
407C (N)
407A (V)
422D (V)
FV-1/5 FVE-1/5 EFV-1/5 EFVE-1/5 1/5
C
Z
ZP40
30 in.
760 mm
1/4 or 3/8
Q
3/8 or 1/2
1 lb.
454 g
1-1/2 lbs.
680 g
FV-1/3 FVE-1/3 EFV-1/3 EFVE-1/3 1/3
FV-1/2 FVE-1/2 EFV-1/2 EFVE-1/2 1/2
FV-1 FVE-1 EFV-1 EFVE-1 1
FV-1-1/2 FVE-1-1/2 EFV-1-1/2 EFVE-1-1/2 1-1/2
3/8
E
1/2
– FVE-2 – EFVE-2 2
FV-2-1/2 – EFV-2-1/2 – 2-1/2
– – – EFVE-3 3
134a (J)
12 (F)
401A (X)
409A (F)
FJ-1/8 FJE-1/8 EFJ-1/8 EFJE-1/8 1/8
C
1/4 or 3/8
Q
3/8 or 1/2
FJ-1/6 FJE-1/6 EFJ-1/6 EFJE-1/6 1/6
FJ-1/4 FJE-1/4 EFJ-1/4 EFJE-1/4 1/4
FJ-1/2 FJE-1/2 EFJ-1/2 EFJE-1/2 1/2
FJ-1 FJE-1 EFJ-1 EFJE-1 1
3/8
E
1/2
FJ-1-1/2 FJE-1-1/2 EFJ-1-1/2 EFJE-1-1/2 1-1/2
– FJE-2 – EFJE-2 2
404A (S)
502 (R)
408A (R)
FS-1/8 FSE-1/8 EFS-1/8 EFSE-1/8 1/8
C
Z
ZP40
1/4 or 3/8
Q
3/8 or 1/2
FS-1/6 FSE-1/6 EFS-1/6 EFSE-1/6 1/6
FS-1/4 FSE-1/4 EFS-1/4 EFSE-1/4 1/4
FS-1/2 FSE-1/2 EFS-1/2 EFSE-1/2 1/2
FS-1 FSE-1 EFS-1 EFSE-1 1
3/8
E
1/2
FS-1-1/2 FSE-1-1/2 EFS-1-1/2 EFSE-1-1/2 1-1/2
– FSE-2 – EFSE-2 2
507 (P)
402A (L)
FP-1/8 FPE-1/8 EFP-1/8 EFPE-1/8 1/8
C
Z
ZP40
1/4 or 3/8
Q
3/8 or 1/2
FP-1/6 FPE-1/6 EFP-1/6 EFPE-1/6 1/6
FP-1/4 FPE-1/4 EFP-1/4 EFPE-1/4 1/4
FP-1/2 FPE-1/2 EFP-1/2 EFPE-1/2 1/2
FP-1 FPE-1 EFP-1 EFPE-1 1
3/8
E
1/2
FP-1-1/2 FPE-1-1/2 EFP-1-1/2 EFPE-1-1/2 1-1/2
– FPE-2 – EFPE-2 2
SPECIFICATIONS ELEMENT SIZE NO. 43, KNIFE EDGE JOINT