Sporlan Replacement Parts Bulletin 122, November 2009
BULLETIN 122 – Page 1 Table of Contents Level Master Control. . . . . . . . . . . . . . . . . . . . . . . . * Thermostatic Expansion Valves RC Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ER Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 BF, SBF and EBF Series . . . . . . . . . . . . . . . . . . . . . . . . .
Page 2 – BULLETIN 122 Thermostatic Expansion Valves Flare and Solder Connections THERMOSTATIC EXPANSION VALVE REPLACEMENT PARTS ITEM NUMBER PART NUMBER and DESCRIPTION DRAWINGS ON PAGES 3 thru 10 183019 772-000 183015 3008-000 183017 1538-000 183023 588-000 183025 589-000 1/2” SAE 183024 590-000 5/8” SAE 183026 1524-000 183378 1935-000 * 183002 3427-000 ** VALVE TYPE and QUANTITY OF PART REQUIRED PER VALVE ER 3/8” SAE Inlet Strainer 877-004 1/2” ODF 1 877-005 5/8” ODF 1 1838
BULLETIN 122 – Page 3 Thermostatic Expansion Valves RC Series See Parts Table on Page 2 6 Thermostatic Element 1 Retaining Ring 1 Pushrod Seal 1 RC Valve Body 3 Inlet Strainer 1 Pushrod 1 Poppet 1 Seat 1 Port 1 Spring Guide 4 Spring 2 Adjusting Stem Assembly 1 Replacement part not available. 2 Part is not available separately, but is included with the Bottom Cap Assembly Kit. See Page 19. 3 Part is available separately. See Page 2. 4 Part is available separately.
Page 4 – BULLETIN 122 Thermostatic Expansion Valves ER Series See Parts Table on Page 2 6 Thermostatic Element 1 Retaining Ring 1 Pushrod Seal 1 ER Valve Body 1 Pushrod 3 Inlet Strainer 1 Spring Guide 4 Spring 2 Adjusting Stem Assembly 2 Bottom Cap 2 Retaining Ring 5 Seal Cap 1 Replacement part not available. 2 Part is not available separately, but is included with the Bottom Cap Assembly Kit. See Page 19. 3 Part is available separately. See Page 2. 4 Part is available separately.
BULLETIN 122 – Page 5 Thermostatic Expansion Valves BF, SBF and EBF Series See Parts Table on Page 2 6 Thermostatic Element 3 Inlet Strainer 3 Inlet Strainer 1 SBF Valve Body 1 EBF Valve Body 1 BF Valve Body 3 Inlet Strainer 1 Pin, Pushrod and Port Assembly 1 Pin Guide 4 Spring 2 Adjusting Stem Assembly 2 Bottom Cap 1 Replacement part not available. 2 Part is not available separately, but is included with the Bottom Cap Assembly Kit. See Page 19. 3 Part is available separately. See Page 2.
Page 6 – BULLETIN 122 Thermostatic Expansion Valves F and EF Series See Parts Table on Page 2 6 Thermostatic Element 1 Pushrods 1 F Valve Body 3 Inlet Strainer 1 EF Valve Body 3 Inlet Strainer 1 Pin and Carrier 4 Spring 2 Adjusting Stem Assembly 2 Botton Cap 2 Retaining Ring 5 Seal Cap 1 Replacement part not available. 2 Part is not available separately, but is included with the Bottom Cap Assembly Kit. See Page 19. 3 Part is available separately. See Page 2. 4 Part is available separately.
BULLETIN 122 – Page 7 Thermostatic Expansion Valves EG, G and C Series See Parts Table on Page 2 7 Thermostatic Element 2 Pushrods 1 G or C Valve Body 2 Seat 3 Inlet Strainer 2 Pin and Carrier 1 EG Valve Body 4 Spring Guide 5 Spring 4 Spring Guide 3 Bottom Cap 1 Replacement part not available. 2 Part is not available separately, but is included with the Internal Parts Kit. See Page 19. 3 Part is not available separately, but is included with the Bottom Cap Assembly Kit. See Page 19.
Page 8 – BULLETIN 122 Thermostatic Expansion Valves S and EBS Series See Parts Table on Page 2 7 Thermostatic Element 4 Inlet Strainer (optional) 1 EBS Valve Body 2 Pushrods 1 S Valve Body 1 Pushrod 1 Spring Guide 2 Seat 2 Pin and Carrier 4 Spring Guide 5 Spring 4 Spring Guide 3 Bottom Cap 3 Adjusting Stem 3 Adjusting Stem Packing 3 Adjusting Stem Packing Nut 6 Seal Cap 1 Replacement part not available. 2 Part is not available separately, but is included with the Internal Parts Kit.
BULLETIN 122 – Page 9 Thermostatic Expansion Valves P Series See Parts Table on Page 2 7 Thermostatic Element 1 Pushrod Packing Nut 1 Pushrod Packing 2 Pushrods 1 P Valve Body 2 Seat 2 Pin and Carrier 5 Spring 4 Spring Guide 3 Adjusting Stem 1 Replacement part not available. 2 Part is not available separately, but is included with the Internal Parts Kit. See Page 19. 3 Part is not available separately, but is included with the Bottom Cap Assembly Kit. See Page 19. 4 Part is available separately.
Page 10 – BULLETIN 122 Thermostatic Expansion Valves Type O (small and large) See Parts Table on Page 2 5 Thermostatic Element 1 O Valve Body 2 Pushrod Assembly 2 Piston 3 Spring 4 Spring Guide 2 Bottom Cap 2 Adjusting Stem 2 Adjusting Stem Packing 2 Adjusting Stem Packing Nut 4 Seal Cap Gasket (Large Type O Only) 4 Seal Cap 1 Replacement part not available. 2 Part is not available separately, but is included with the Internal Parts Kit. See Page 19. 3 Part is available separately.
BULLETIN 122 – Page 11 Thermostatic Expansion Valves Q and BQ Series Q CARTRIDGE SERVICE KIT PARTS ITEM NUMBER PART NUMBER SIZE BQ CARTRIDGE SERVICE KIT PARTS COLOR CODE ITEM NUMBER PART NUMBER CARTRIDGE AND I.D. TAG* SIZE COLOR CODE CARTRIDGE AND I.D.
Page 12 – BULLETIN 122 Thermostatic Expansion Valves Q, SQ and EQ Series See Parts Table on Page 11 Q VALVE BODY 6 Thermostatic Element VALVE TYPE Q Internally Equalized QE 7 Cartridge Externally Equalized 8 Inlet Strainer SQ Internally Equalized 7 Pushrods SQE Externally Equalized 8 Inlet Strainer 3 SQ Body Internally Equalized EQE* 3 EQ Body Externally Equalized Inlet x Outlet 1/4” x 3/8” SAE 1/4” x 1/2” SAE 3/8” x 1/2” SAE 1/4” x 3/8” x 1/4” SAE 1/4” x 1/2” X 1/4” SAE 3/8” x 1/2” x
BULLETIN 122 – Page 13 Thermostatic Expansion Valves BQ, SBQ and EBQ Series See Parts Table on Page 11 BQ VALVE BODY VALVE TYPE BQ Internally Equalized BQE Externally Equalized SBQ STANDARD CONNECTIONS Inches Inlet x Outlet 1/4” x 3/8” SAE 1/4” x 1/2” SAE 3/8” x 1/2” SAE 1/4” x 3/8” x 1/4” SAE 1/4” x 1/2” X 1/4” SAE 3/8” x 1/2” x 1/4” SAE ITEM NUMBER 168192 168191 168190 168185 168184 168183 3/8” x 1/2” ODF 168193 Externally Equalized 3/8” x 1/2” x 1/4” ODF 168198 EBQ* 3/8” x 1/2” ODF 3/8”
Page 14 – BULLETIN 122 Thermostatic Expansion Valves Flange Series THERMOSTATIC EXPANSION VALVE REPLACEMENT PARTS ITEM NUMBER PART NUMBER and DESCRIPTION DRAWINGS ON PAGES 16, 17 and 18 VALVE TYPE and QUANTITY OF PART REQUIRED PER VALVE H M V 1 1 1 1 W A D 1 1 **** † 183620 106-001 183625 123-005 183890 † 358-000 **** 183620 958-000 183750 123-000 184930 † 108-000 A - 1/8” (20T) 1 184932 † 108-001 A - 5/32” (30T) 1 184934 † 108-002 A - 3/16” (50T) 1 184920 † 208-001
BULLETIN 122 – Page 15 Thermostatic Expansion Valves Flange Series THERMOSTATIC EXPANSION VALVE REPLACEMENT PARTS ITEM NUMBER PART NUMBER and DESCRIPTION DRAWINGS ON PAGES 16, 17 and 18 VALVE TYPE and QUANTITY OF PART REQUIRED PER VALVE M V 1/2” Socket Weld H 1 or 2 1 or 2 3/4” Socket Weld 1 or 2 1 or 2 1” Socket Weld 1 or 2 1 or 2 W A 183044 3123-000 183561 376-000 183046 3146-000 183558 † 580-000 1/2” Socket Weld 183040 † 3122-000 1/2” Socket Weld 1 or 2 183560 † 377-000
Page 16 – BULLETIN 122 Thermostatic Expansion Valves H and M Series See Parts Table on Page 14 or 15 0 Thermostatic Element 7 Element Gasket 4 Pushrod Packing Nut 4 Pushrod Packing (Type M Only) 6 Nut 2 Pushrod 4 Solder Flange (or Pipe Flange) 4 Solder Bushing 1 Valve Body 7 Bushing Gasket 4 Inlet Strainer Screen (Available Separately on Type M Only) 2 Seat 2 Pin and Carrier 6 Bolt 5 Spring (or Outer Spring on Type M) 5 Inner Spring (Type M Only) 8 Spring Guide 3 Adjusting Stem 4 Spring Guid
BULLETIN 122 – Page 17 Thermostatic Expansion Valves V and W Series See Parts Table on Page 14 or 15 0 Thermostatic Element 7 Element Gasket 2 Pushrod 4 Pushrod Packing Nut 4 Pushrod Packing 4 Solder Bushing 6 Bolt (Type V Only) 4 Solder Flange 1 Valve Body (or Pipe Flange - Type V Only) 7 Bushing Gasket 4 Inlet Strainer Screen 2 Piston 6 Nut 5 Spring 1 Replacement part not available. 2 Part is not available separately, but is included with the Internal Parts Kit. See Page 19.
Page 18 – BULLETIN 122 Thermostatic Expansion Valves D and A Series See Parts Table on Page 14 or 15 11 Type A Valve Element Thermostatic Element 7 Element Gasket 4 Pushrod Packing Nut 4 Pushrod Packing 7 Element Gasket 6 Bolt 4 Pipe Flange 2 Pushrod 7 Flange Gasket 0 Inlet Strainer Ring 6 Element Cap Screws 4 Inlet Strainer Screen 7 Flange Gasket 1 Valve Body 4 Discharge Tube 2 Seat 2 Pin and Carrier 5 Spring 8 Spring Guide XD Strainer Type DA Valve Only 9 Bottom Cap Gasket 3 Bottom Cap
BULLETIN 122 – Page 19 Thermostatic Expansion Valves Replacement Parts Kits INTERNAL PARTS KITS FOR CURRENT VALVE TYPES INTERNAL PARTS KITS FOR CURRENT VALVE TYPES NOMINAL CAPACITY INTERNAL or VALVE ITEM Tons of Refrigeration EXTERNAL KIT No. TYPE No. 12, 404A, EQUALIZER 22 134a 502, 507 The following Kits contain: 1 Seat, 1 Pin & Carrier, 2 Pushrods, Pushrod Gauge.
Page 20 – BULLETIN 122 Thermostatic Expansion Valves Identifying Sporlan TEVs To completely identify a SPORLAN Thermostatic Expansion Valve the following information is required: 9 5 2 Type of valve (body style) Refrigerant External equalizer Capacity in tons of refrigerant or port size Type of Thermostatic Charge Thermostatic bulb size if other than standard Suffix letters - if any - indicate permanent bleed port or Rapid Pressure Balancer construction (All valves except Type A & D) 8 Inlet and outle
BULLETIN 122 – Page 21 Thermostatic Expansion Valves Identifying Sporlan TEVs Table C Table A GA, CP, and ZP CHARGED VALVES THERMOSTATIC ELEMENT KITS Specify Refrigerant, Thermostatic Charge & Tubing Length CURRENT VALVE TYPES VALVE TYPE KIT NUMBER KIT CONTENTS A KT-12 1 D KT-23 P, H, O Large KT-33 O Large (R-410A) KT-85-3 (E)Q, SQ, (E)BQ, SBQ, (E)F, KT-43 (E)BF, SBF, ER Small, RC 2 (E)BQ, SBQ, ER Small, RC (R-410A) KT-45 ER Large KT-45-5 (E)G, X, (E)MC KT-53 M, V, W Small KT-63 1 W Large KT-7 C, S,
Page 22 – BULLETIN 122 Solenoid Valves X Rapid Cycle Series 4 Coil Housing Locknut RAPID CYCLE SOLENOID VALVE REPLACEMENT PARTS ITEM NUMBER 4 Spacer Cup 3 Valve Nameplate O M N, USA TO NG .P. .R M HI AS W .D. .O.
BULLETIN 122 – Page 23 Solenoid Valves W, R and XOF/XJH Industrial Series INDUSTRIAL SOLENOID VALVE REPLACEMENT PARTS ITEM NUMBER 382270 382016 382175 958101 382008 183715 — 183605 380103 380100 380101 380102 382145 382155 382165 382170 382017 — — PART NUMBER and DESCRIPTION 2071-3 13444-1 13683-1 1390-000 14115 1328-14 621-15 638-132 14000-1 14000-3 14000-4 14000-5 13128-2 13256-2 13552-1 13681-1 15052-4 MKC-1 MKC-2 W3 2 Body Screw VALVE TYPE and QUANTITY OF PART REQUIRED PER VALVE W14 W19 W25 R183 R
Page 24 – BULLETIN 122 Solenoid Valves Normally Closed Series 5 Coil Housing Locknut NORMALLY CLOSED SOLENOID VALVE REPLACEMENT PARTS ITEM NO. 4 Valve Nameplate NG TO N, O USA .R M . .P.D .O M PE TY 4 Coil 4 Enclosing Tube Locknut 3 Enclosing Tube Assembly 5 Enclosing Tube Gasket**** 2 Stem & Plunger Assembly 2 Disc Assembly .P.
BULLETIN 122 – Page 25 Solenoid Valves Normally Open Series 4 Coil Housing Locknut NORMALLY OPEN SOLENOID VALVE REPLACEMENT PARTS ITEM NO.
Page 26 – BULLETIN 122 Solenoid Valves (O)(M)B33 Series See Parts Table on Page 24 and 25 7 Coil Housing Screw 4 Valve Nameplate O TO HI N, US A .P. M .R M NG AS W . .O M .P.D PE TY d se lo yC all rm No yO all rm No 6 Spacer Cup 4 Valve Nameplate n pe 7 Coil Housing Locknut 4 Coil 7 Enclosing Tube Gasket* 4 Enclosing Tube Locknut 4 Flange Plate Bolt A US , MO ON GT .P. .R M IN SH WA 2 Pilot Valve Flange Plate D. .O.P.
BULLETIN 122 – Page 27 Solenoid Valves (O)(M)E34 and (O)(M)E42 Series See Parts Table on Page 24 and 25 7 Coil Housing Screw 4 Valve Nameplate A O HI NG N, TO US .P. M .R M AS W . .P.D .O M PE TY y all ed s Clo rm No y all en Op rm No 7 Coil Housing Locknut 4 Flange Plate Bolt 6 Spacer Cup 4 Valve Nameplate US .R M SH WA 2(A) Disc Assembly 2(A) Pilot Valve Flange Plate A , MO ON GT IN 6(A) Enclosing Tube Gasket* .P. D. .O.P.
Page 28 – BULLETIN 122 Solenoid Valves (O)(M)E35 Series See Parts Table on Page 24 and 25 6 Coil Screw A N, TO ING SH WA . .P.D M.O PE TY N, ING MO A US TO SH WA . R.P M. .D. O.P M. PE TY 4 Valve Nameplate US .P. M.
BULLETIN 122 – Page 29 Solenoid Valves Flange Series SOLENOID VALVE REPLACEMENT PARTS ITEM NUMBER PART NUMBER and DESCRIPTION DRAWINGS ON PAGES 30 and 31 382103 382080 — 382005 — — — — 382185 382190 382195 183716 183650 183705 183710 382135 183746 183770 183745 183780 183775 382240 — 382250 183468 183470 183456 183472 183458 183476 183460 183480 183484 183488 X3073-1 X2480-1 506-1 1025-1 533-1 374-1 1302 KC-3 529-1 887-1 947-1 1328-22 530 886 938-1 1678-1 106-004 546 106-003 894 929 391-3 811-5 946-4 2
Page 30 – BULLETIN 122 Solenoid Valves MA5 Series 4 Coil Voltage Nameplate See Parts Table on Page 29 5 Coil Housing Locknut 4 Valve Nameplate 4 Coil Housing Assembly 4 Enclosing Tube Locknut (Conduit Boss, as shown, or Junction Box) 3 Enclosing Tube Assembly 4 Coil Sleeve 5 Enclosing Tube O-Ring 4 Coil Spring 2 Stem & Plunger Assembly 4 Coil 6 Flange Nut 2 Seat 4 Coil Housing Bottom Plate XD Strainer (See Strainers on Page 64) 1 Body 4 Coil Sleeve 4 Pipe Flange 4 Flat Flange Gasket 4 Flat
BULLETIN 122 – Page 31 Solenoid Valves MA50 Series See Parts Table on Page 29 4 Flange Plate Bolt 5 Coil Housing Locknut 4 Coil Housing Assembly 4 Enclosing Tube Flange Plate 4 Coil Voltage Nameplate 4 Valve Nameplate 3 Enclosing Tube Assembly (Conduit Boss, as shown, or Junction Box) 5 Enclosing Tube Flat Gasket 2 Stem & Plunger Assembly 4 Coil Sleeve 4 Coil Spring 2 Closing Spring 4 Coil (MA42 Only) 4 Pipe Flange (Inlet) 2 Piston Assembly 4 Coil Sleeve 6 Flange Nut 6 Flange Bolt 4 Flat Fl
Page 32 – BULLETIN 122 Solenoid Valves 10G Hot Gas Defrost and 3-Way Heat Reclaim Series 6 Coil Housing Screw SH A W IN O SA U PE TY . .P ,M N TO G .R M ITEM NUMBER M .O .D .P .
BULLETIN 122 – Page 33 Solenoid Valves 12D 3-Way Heat Reclaim and Split Condenser Series See Parts Table on Page 32 6 Enclosing Tube Locknut 6, 8 Coil Housing Screw A US .P. .R , MO ON GT M IN SH WA . .P.D .
Page 34 – BULLETIN 122 Solenoid Valves 8D and 16D* 3-Way Heat Reclaim and Split Condenser Series See Parts Table on Page 32 * 16D models with date code 6-06 and after. Valves with date codes prior to June 2006 have flanged bodies. TYPE M.O .P.D . WA SHI NG TON , MO USA M.R .P. 2 Coil Housing Screw 4 Valve Nameplate 4 Coil 3 Pilot Valve Assembly 2 Pilot Assembly Gasket 1 Body 1 Replacement part not available.
BULLETIN 122 – Page 35 Solenoid Valves Parts Kits DISC / PISTON / DIAPHRAGM KITS NORMALLY CLOSED VALVES ITEM DESCRIPTION VALVE TYPE KIT NUMBER NO.
Page 36 – BULLETIN 122 Cap Screw, Bolt and Nut Specifications Up to 1/2 FPT Flange Up to 1-3/8 M, V W THERMOSTATIC EXPANSION VALVES 1124 Distributor Flange 5/8, 7/8, 1-1/8 1109, 1110, 1192 Distributor Flange Up to 1/2 FPT 1121, 1193 Distributor 1119 Distributor Up to 1-3/8 1-5/8 ODF Up to 1 FPT 1-1/8, 1-3/8, 1-5/8, 2-1/8 ODF Flange 1/4, 3/8, 1/2 FPT XD Strainer XD Strainer x MA5 Solenoid D — A Flange 1/2, 3/4, 1 FPT 8000 Strainer 8000 Strainer x MA17 Solenoid — — Flange on Valve Body Flange 1-5/
BULLETIN 122 – Page 37 Replaceable Core Catch-All® Filter-Driers C-R420 Series 1 Pipe Plug “G” C-R420 SERIES REPLACEMENT PARTS and PARTS KITS ITEM NUMBER CURRENT PART NUMBER CURRENT DESCRIPTION OBSOLETE 481300 JP-711-000 4163-9 Bolt, 5/16” x 1-1/2” (6 Req’d) 481220 JP-679-000 6162 Core Retainer Assembly 481216 JP-335-001 6154 Endplate (Plain) NOT C-R420 SERIES SUPPLIED INTERNAL IN KIT PARTS KIT * X Bolt (6 Required) Endplate (“-G” Type Shown) 1 X 481217 JP-335-000 6154-2 Endplat
Page 38 – BULLETIN 122 Replaceable Core Catch-All® Filter-Driers C-480 Series through C-1920 Series C-480 THROUGH C-1920 REPLACEABLE CORE PARTS and PARTS KITS ITEM DESIGN NUMBER A, B, C 481292 A, B, C 481289 A, B, C — A, B, C A, B, C A, B, C A B C B A, B, C A, B, C A, B, C A, B, C A B C B B, C A, B, C A, B, C A, B, C 481164 480031 481125 — — 481116 481126 481287 481101 481091 481093 — 481095 481090 481276 481272 481203 481228 481232 ITEM DESIGN NUMBER PART NUMBER and DESCRIPTION DRAWING ON PAGE 3
BULLETIN 122 – Page 39 Replaceable Core Catch-All® Filter-Driers C-480 Series through C-1920 Series 2 Pipe Plug See Parts Table on Page 38 Bolt (8 Required) Endplate Mounting Bracket (“-G” Feature Shown) Item No.: 481304, A-685 Mounting Bracket for shell types C-480 thru C-1920 series. One bracket per package. Depending on shell size and installation requirements, more than one bracket may be required. Catch-Alls larger than C-480 series generally require two brackets.
Page 40 – BULLETIN 122 Replaceable Core Catch-All® Filter-Driers C-480 Series through C-1920 Series C-480 THROUGH C-1920 REPLACEABLE CORE PARTS and PARTS KITS C-480 SERIES ITEM NUMBER PART NUMBER and DESCRIPTION 481292 4163-11 Bolt 5/16” x 1-3/4” (8 Req’d) Heat Treated Steel - Zinc Plated 1 481289 4086-11 Bolt 5/16” x 1-3/4” (8 Req’d) Sermagard Coated Steel 2 481287 481164 480031 481101 6244-2 5318-3 5318-5 5310 481125 481116 480016 480018 480020 480022 480024 480026 480028 481203 481461 48146
BULLETIN 122 – Page 41 Replaceable Core Catch-All® Filter-Driers C-30000 and C-40000 Series C-30000 and C-40000 REPLACEMENT PARTS and PARTS KITS ITEM NUMBER PART NUMBER and DESCRIPTION 481293 481291 — 481197 481200 480096 481151 481286 481101 481211 481213 481212 481264 481244 481248 4103-15 4087-15 — 6278-1 6278-4 1288-013 6230-1 6244-3 5310 6260-5 6260-6 6273-1 6242-1 6243-2 6243-1 Heat Treated Steel - Zinc Plated 1 Bolt 3/8” x 2-1/4” Sermagard Coated Steel 2 (10 Req’d) Stainless Steel (Obsolete - U
Page 42 – BULLETIN 122 Replaceable Suction Filters RSF-480 and RSF-960 Series RSF-480 and RSF-960 REPLACEMENT PARTS and PARTS KITS DESIGN B, C B, C B, C B, C B C C B, C B, C C B, C B C B, C B, C B, C ITEM NUMBER 183174 481289 480031 481125 — 481116 481117 481287 481088 481089 481095 — 481276 481272 481260 481251 PART NUMBER and DESCRIPTION — 4086-11 5318-5 1288-001 — 5383-5 5383-6 6244-2 5289-1 5295-3 5296-4 — 6172-6 6171-5 4602-5 5327-3 Access Valve Kit (1/4” SAE x 1/4” NPT) 1 Bolt 5/16” x 1-3/4” (8
BULLETIN 122 – Page 43 Pressure Regulating Valves (A)DRI(E), (A)DRS(E), (A)DRP(E) and (A)DRH(E) Series Adjustable Element REPLACEMENT PARTS and PARTS KITS ITEM NO.
Page 44 – BULLETIN 122 Pressure Regulating Valves (S)ORIT Series (S)ORIT REPLACEMENT PARTS and PARTS KITS ITEM NUMBER PART NUMBER and DESCRIPTION DRAWING ON PAGE 45 12 VALVE TYPE and SIZE ORIT SORIT 15 20 12 15 QUANTITY REQUIRED 20 REPLACEMENT PARTS SOLD SEPARATELY 958070 958071 958173 958174 958101 2421-000 2422-000 2420-002 2423-002 1390-000 — 5014-xxx 908024 908073 183058 183060 — 183604 183675 A-4 0/100 A-4 75/150 2625-001 2625-002 MKC-1 2539-000 2645-000 1 Adaptor 1 1 1 1 Body Flange
BULLETIN 122 – Page 45 Pressure Regulating Valves (S)ORIT Series See Parts Table on Page 44 8 Outlet Adaptors 4 Coil Screw A US N, .P. MO .R TO M ING SH WA . .P.D .
Page 46 – BULLETIN 122 Pressure Regulating Valves (S)ORIT-PI Series See Parts Table on Page 47 3 Adjustment Screw 3 Coil Retaining Screw 3 Valve Nameplate 4 Adjustable Element US A , MO TON ING D. .P. .O M .P. .R M SH WA PE TY 3 Coil 4 Adjustable Element 2 ORIT-PI Pilot Assembly 5 Cap Screw (4 Required) 6 O-Ring (Electric Open Assembly) 2 SORIT-PI 3 Coil Pilot Assembly (with Solenoid Stop Feature) 8 Electric Open Assembly 7 O-Ring (Body) .R.P. M PE TY .O M .P. D.
BULLETIN 122 – Page 47 Pressure Regulating Valves (S)ORIT-PI Series (S)ORIT-PI REPLACEMENT PARTS and PARTS KITS ITEM NO.
Page 48 – BULLETIN 122 Pressure Regulating Valves (S)HGB(E)-8 Series SHGB(E)-8-0/100 REPLACEMENT PARTS and PARTS KITS 5 Coil Screw A US , MO ON GT ITEM NUMBER PART NUMBER and DESCRIPTION SH WA QUANTITY REQUIRED .
BULLETIN 122 – Page 49 Pressure Regulating Valves SHGB(E)-15 Series 3 Coil Screw 3 Valve Nameplate SHGB(E)-15-0/75 REPLACEMENT PARTS and PARTS KITS A US N, .P. MO .R TO M ING SH WA ITEM NUMBER . .P.D .
Page 50 – BULLETIN 122 Pressure Regulating Valves HGBE-5 Series Note: Replacement parts for the HGBE-5 are currently not available. Contact the Sporlan Division for future availability.
BULLETIN 122 – Page 51 Pressure Regulating Valves (O)LDR Series (O)LDR REPLACEMENT PARTS and PARTS KITS PART NUMBER and DESCRIPTION DRAWINGS ON PAGES 52, 53 and 54 ITEM NUMBER — 183675 382260 — 382200 — — — — 382005 — 958101 183660 380104 — 382150 — 183710 — 958148 621-11 621-036 382580 382623 382003 382020 — 958069 641-006 (Prior to 2004) 2645-000 (As of 2004) 21007-7 21028-7 4208-5 MKC-1 MKC-2 OMKC-1 OMKC-2 1025-1 1025-7 1390-000 641-3 (Prior to 3-1999) 14000-2 (As of 3-1999) 14000-1 13252-1 13256-2
Page 52 – BULLETIN 122 Pressure Regulating Valves (O)LDR-15 Series 3 Coil Screw 3 Valve Nameplate US N, A .P. MO .R TO SH WA M ING . M .P.D .O PE TY 3 Coil Housing Locknut 3 Spacer Cup 3 Valve Nameplate 3 Coil A US N, TO MO .P. .R M ING SH WA 3 Enclosing Tube Locknut . P.D .O.
BULLETIN 122 – Page 53 Pressure Regulating Valves (O)LDR-16 Series 6 Coil Screw -16 en DR Op OL ally A O N, HI 4 Spacer Cup A US , MO ON GT .P. .R M IN SH WA 4 Valve Nameplate a rm No 5 Hex Cap Screw (4 Required) 5 Valve Nameplate . .P.D .O M PE TY 2 Manual Operating Stem Assembly N 4 Coil Housing Locknut .P. .
Page 54 – BULLETIN 122 Pressure Regulating Valves (O)LDR-20 Series 20 R- Open D L lly O 20 d R- Close D L lly ma r No 4 Coil Housing Locknut 4 Spacer Cup A US , MO ON GT .R .P. M IN SH WA 4 Valve Nameplate a rm No 6 Enclosing Tube Gasket* 1 Upper Valve Body D. .O.P. M PE TY 4 Body Flange Gasket 4 Coil 4 Enclosing Tube Locknut 1 Enclosing Tube Assembly US A .P. .R M .P.D . .
BULLETIN 122 – Page 55 Pressure Regulating Valves DDR-20 Series 3 Coil Screw 3 Valve Nameplate .P. MO .R M . .P.D .
Page 56 – BULLETIN 122 Pressure Regulating Valves Replacement Parts CRANKCASE PRVs - EVAPORATOR PRVs - HEAD PRESSURE REGULATING VALVES ITEM NUMBER 908039 908041 183690 183601 908017 908019 — 908074 908002 908001 908003 908005 908007 PART NUMBER and DESCRIPTION 838-000 6 895-000 6 621-016 621-023 KO-6-100/290 KO-10-100/290 A-4S- 1 825-003 825-004 825-005 825-007 825-009 825-011 CRO(E)-4 Valve Cap 1 O-Ring, Valve Cap Spring Kit 2 Spring Kit 3 Adjustable Element Inlet Strainer (3/8” ODF) Inlet Strainer
BULLETIN 122 – Page 57 Electronic Temperature Control Systems CDS Series 2 Motor and Adaptor Assembly CDS PARTS KITS Motor Housing Locknut ITEM NUMBER MODEL MOTOR and ADAPTOR ASSEMBLY O-RING or GASKET PART NUMBER* 958182 CDS(T)-4** KS-CDS(T)-4 380100 958183 CDS(T)-7** KS-CDS(T)-7 — 958122 CDS(T)-9 KS-CDS(T)-9 — 958111 CDS(T)-16 KS-CDS(T)-16 908077 958123 CDS(T)-17 KS-CDS(T)-17 908078 * Included in parts kit. ** Cable retainers included in kit. Not available separately.
Page 58 – BULLETIN 122 Electronic Temperature Control Systems SDR Series SDR PARTS KITS ITEM NUMBER MODEL MOTOR and ADAPTOR ASSEMBLY 958131 SDR-3 KS-SDR-3 958159 SDR-3X KS-SDR-3X 958132 SDR-4 KS-SDR-4 O-RING or GASKET ITEM NUMBER* 183690 183620 *Included in parts kit. 1 Motor and Adaptor Assembly 1 Motor and Adaptor Assembly Motor Housing Motor Housing Gasket O-Ring SDR-4 Valve Body SDR-3 Valve Body 1 All joints are sealed and no attempt should be made to disassemble.
BULLETIN 122 – Page 59 Electronic Temperature Control Systems SEI, SEH and SEHI Series SEI, SEH and SEHI PARTS KITS ITEM NUMBER MODEL MOTOR and ADAPTOR ASSEMBLY O-RING or GASKET ITEM NUMBER* 958146 SEI-30 KS-SEI-30 183690 958124 SEI-50 KS-SEI-50 183620 958125 SEH-100, SEH-175 KS-SEH-100/175 958125 SEHI-100, SEHI-175 KS-SEH-100/175 SIGHTGLASS ITEM NUMBER None None 780043 *Included in parts kit.
Page 60 – BULLETIN 122 Electronic Temperature Control Systems SER, SERI and ESX Series SER(I) PARTS KITS ITEM NUMBER MODEL CABLE KIT REPLACEMENT PARTS MOTOR and O-RING or GASKET SIGHTGLASS ADAPTOR ASSEMBLY ITEM NUMBER* ITEM NUMBER — SER 1.5, 6, 11, 20 958184 SERI-G KS-SERI-G Not Available 958185 SERI-J KS-SERI-J 958186 SERI-K KS-SERI-K 380100 780043 *Included in parts kit. ITEM NUMBER MODEL CABLE KIT 952526 ESX-5 (5 ft. Cable) ESS-1U 60” Stripped 952527 ESX-10 (10 ft.
BULLETIN 122 – Page 61 Electronic Controllers Reference Chiller Controller (2 Valve Superheat Control) Small SEI, SER SEI-30 R22 R134a R404A R407C R22 R134a R404A R407C p/n 952854 p/n 952855 p/n 952857 p/n 952856 SEI-50, SEH p/n 952849 p/n 952850 p/n 952852 p/n 952851 R22 R134a R404A R407C p/n 952730 p/n 952731 p/n 952733 p/n 952732 Superheat Controller (1 Valve only) Small SEI, SER SEI-30 R22 R134a R404A R407C R22 R134a R404A R407C p/n 952754 p/n 952755 p/n 952757 p/n 952756 R22 R134a R404A R
Page 62 – BULLETIN 122 Oil Level Control Systems Adaptor Kits Fitting Actually Behind Seal Cap Inlet Screen Assembly OL-60CH OL-60HH-6 OL-60NH-2 OL-60XH/OL-60XH-1 OL-60TH-1/OL-60TH-2 OL-60FH OL-60OH OL-60AR Quad-Ring AOL-K-1 O-Ring Cap Screw Sightglass S-OL AOL-BR/TR AOL-MA/TE Cap Screw AOL-BO AOL-BI
BULLETIN 122 – Page 63 Oil Level Control Systems Adaptor Kits Cap Screw Drill mark indicates the top hole.
Page 64 – BULLETIN 122 Oil Level Control Systems Oil Filters OIL FILTER REPLACEMENT PARTS ITEM NUMBER PART NUMBER and DESCRIPTION 481300 JP-711-000 Bolt 5/16” x 1-1/2” (6 required) 481202 JP-344-001 Endplate 481103 1288-005 Gasket, Endplate 481322 JP-710-000 Nut 5/16” (6 Required) 183174 Access Valve Kit (1/4” SAE x 1/4” NPT) Valve Core (P/N: 480088) can be purchased separately.
BULLETIN 122 – Page 65 Strainers STRAINER REPLACEMENT PARTS STRAINER TYPE XD-074* 8004* 8006* 9008* 9010* 9012* GASKET ITEM NUMBER PART NUMBER STRAINER SCREEN** ITEM NUMBER PART NUMBER 183835 609 580042 635-3 183855 4160 580045 4097-3 183840 4111 580048 4110-3 183845 4119 580051 4117-4 6022, 6023 580006 4385-2 6034 580009 4395-2 580012 4405-1 580013 4415-1 6056 6088 Not Required * Strainers and their replacement parts available through Parker R/S Division.
Page 66 – BULLETIN 122 Old to New Part Numbers Sporlan Alpha-Numeric Parts List Sporlan has changed to a new part numbering system for the parts of some product groups. The following tables only include those items that have had a part number change. The table on this Page is sorted in alpha-numeric order on the old part number. Page 67 is a table of the same parts only sorted on the new part number.
BULLETIN 122 – Page 67 New to Old Part Numbers Sporlan Alpha-Numeric Parts List NEW PART NUMBER OLD PART NUMBER DESCRIPTION NEW PART NUMBER OLD PART NUMBER 358-000 117-C 360-000 125-F-1/2” Gasket, Element 360-001 125-F-3/4” Gasket, Bottom Cap 361-000 125-F-7/8” 115-A Gasket, Element 361-001 125-F-1-1/8” 106-003 123-A Gasket, Flange 362-000 125-F-1” 106-005 319-A Gasket, Seat Cap 363-000 125-F-1-3/8” 108-000 108-20 Discharge Tube (A-1/8) 364-000 125-F-1-5/8” 108-001 108-3
FOR USE ON REFRIGERATION and/or AIR CONDITIONING SYSTEMS ONLY Bulletin 122, November 2009 supersedes Bulletin 122, August 2001 and all prior publications.
Parker Hannifin Corporation Sporlan Division 206 Lange Drive • Washington, MO 63090 USA phone 636 239 1111 • fax 636 239 9130 www.sporlan.