Brochure

Page 8 – Bulletin 110-10
COMPRESSOR ADAPTOR REQUIREMENTS
COMPRESSOR
MANUFACTURER
COMPRESSOR
MODEL
NUMBER
COMPRESSOR
ATTACHMENT
PATTERN
SPORLAN
ADAPTOR
KIT NUMBER
SEALING
METHOD
SIGHTGLASS
Bitzer
2KC, 2JC, 2HC, 2GC,
2 FC, 2EC, 2DC, 2CC,
4FC, 4EC, 4DC, 4CC
1-1/8” Thread AOL-MA/TE Use seal provided
Use sightglass
provided with adaptor
4VC, 4TC, 4PC, 4NC
3 Bolt, 1-7/8” B.C.
(47.6 mm B.C.)
None Use seal provided
Use sightglass from
compressor
4J, 4H, 4G, 6J, 6H,
6G, 6F
4 Bolt, 50 mm B.C. None
Use seal provided
with control
Use sightglass from
compressor
8GC, 8FC
3 Bolt, 1-7/8” B.C.
(47.6 mm B.C.)
AOL-R-1 Use seal provided
Use sightglass from
compressor
Bock F...
3 Bolt, 1-7/8” B.C.
(47.6 mm B.C.)
AOL-R-1 Use seal provided
Use sightglass from
compressor
Carrier
06EA, 06ER
3 Bolt, 1-7/8” B.C.
(47.6 mm B.C.)
AOL-R-1
Use seal provided
Use sightglass from
compressor
06DA, 06DR, 5F, 5H 1-1/2” – 18 Thread AOL- C
Use sightglass
provided with adaptor
Copeland
Over 5 Ton
3 Bolt, 1-7/8” B.C.
(47.6 mm B.C.)
AOL-R-1 Use seal provided
Use sightglass from
compressor
Under 5 HP Q 1-1/8” – 12 Thread AOL-A
Use seal from
compressor
Use sightglass
provided with adaptor
8R, 3D Front,
2D, 4D, 6D
3 Bolt, 1-7/8” B.C.
(47.6 mm B.C.)
AOL-R-1 Use seal provided
Use sightglass from
compressor
8D
3 Bolt, 1-7/8” B.C.
(47.6 mm B.C.)
Use control with standard length arms with AOL-R-1 adaptor.
Use sightglass from compressor
Dorin 4 cyc-15 HP
3 Bolt, 1-7/8” B.C.
(47.6 mm B.C.)
Contact Sporlan
Dunham-Bush Big 4
3 Bolt, 1-7/8” B.C.
(47.6 mm B.C.)
AOL-R-1 Use seal provided
Use sightglass from
compressor
Frascold All models
3 Bolt, 1-7/8” B.C.
(47.6 mm B.C.)
AOL-R-1 Use seal provided
Use sightglass from
compressor
Maneurop MT..., LT... 1-1/8” – 18 Thread AOL-MA/TE Use seal provided
Use sightglass
provided with adaptor
Tecumseh
P, R, S, PA, RA, SA,
CK, CM, CH, CG
1-1/8” – 12 Thread AOL-A
Use seal from
compressor
Use sightglass
provided with adaptor
— 1-1/8” – 18 Thread AOL-MA/TE Use seal provided
VS 3/4” – 14 Thread AOL-K-1 Use seal provided
Trane
M, R
3 Bolt, 1-7/8” B.C.
(47.6 mm B.C.)
AOL-R-1 Use seal provided
Use sightglass from
compressor
K 3/4” NPT AOL-K-1 Use Teon tape
Use sightglass
provided with adaptor
York GC, GS, JS
3 Bolt, 1-7/8” B.C.
(47.6 mm B.C.)
AOL-R-1 Use seal provided
Use sightglass from
compressor
NOTE: Shipping weight is 4 lbs. (1.8 Kg) for oil level controls and 1 lb. (0.45 Kg) for adaptors.
Q Some compressor models have a smaller diameter port than the arm diameter of the oil level control. This situation can mislead the control in the amount of oil
that is actually in the compressor. It is advisable the selection and adjustment of the control be reviewed in this situation.