Installation guide

English ASSEMBLY INSTRUCTIONS:
We recommend that two adults work together to assembie this table.
The table will be assembled upside down and then turned over onto its legs.
This is a very heavy table and turning it over will require at least two strong
adults.
We suggest that you use the bottom carton as a clean flat work area to protect
the table.
FIG. 1:
Fold Leg - B (#2) into an L-shape. Attach one Top Leg Cap (#3) to
Leg - B (#2) using two Bolts (#11) as shown in Flg. 1.
Attach Bottom Leg Cap (#4) to bottom of Leg - B (#2) using two bolts
(#11).
Insert one Dowel (#12) into each side of Leg - B (#2). See Figs. 1C
and 1D.
Fold Leg - A (#1). Align holes at the side and place onto dowels. See
Fig. 1C.
Attach Leg - A (#1) to Bottom Leg Cap (#4) using two bolts (#11).
See Fig. 1E. Repeat same for Top Leg Cap (#3).
Attach Leg Base (#15) to leg assembly using four screws (#16). See
Fig. 1F.
Repeat above steps for other three legs.
Ad) Fs = (1)
BO@OOOOOOD
4-1-32-931 PL (Continued on the next page.) P.3
/
Gap
©2009 Sportcraft, Lid.
www.sportcraft.com