Installation Guide

12 1-800-732-0144

MATCH THE COLLAR RECEIVER AND REMOTE

TRANSMITTER

To match the Collar Receiver to work with a new Remote Transmitter or to match a new Collar Receiver to work

with your existing Remote Transmitter:

A. Turn the Collar Receiver oﬀ .

B. Press and hold the On/Oﬀ Button. The Receiver Indicator Light will come on, then turn oﬀ after 4-5

seconds. If the On/Oﬀ Button is released too early, the Receiver Indicator Light will begin ﬂ ashing as

normal. If this occurs, start over from A.

C. After the Receiver Indicator Light has turned oﬀ , release the On/Oﬀ Button.

D. Press and hold the Upper Button on the Remote Transmitter until the Receiver Indicator Light ﬂ ashes 5

times. Once the Receiver Indicator Light has ﬂ ashed 5 times, the Collar Receiver has been matched and will

begin ﬂ ashing as normal. If the Receiver Indicator Light does not ﬂ ash 5 times, start over from A.

STEP