User's Manual Part 1

Table Of Contents
Direct punching modes (CLEAR, CHECK, START, CONTROL, FINISH)
The working distance is up to 5 cm. Only one SI-Card can be managed by the station at the same
time.
Handling and service
The Control Station BS11-BS blue needs only minimal services. In typical application
cycles only station’s real time has to be monitored.
Station’s settings can be changed by using the software SI-Config+.
The rechargeable battery has got a capacity of 1800 mAh. This is sufficient to power the
station for more than 75 hours without a break. After that the battery must be charged via
USB connector.
The station is switched on with a magnet switch placed at stations side. To turn off the
station activate the button and wait for three flashing cycles. Turning off the station is
prolonged to prevent switching off inadvertently.
SPORTident Control Station BS11-BS blue features an easy firmware upgrade
mechanism.
Station's firmware can be uploaded by the user via USB connection. Using this feature the
station keeps up to date and enables the implementation of additional functionality. The
firmware upgrade service is fully integrated in SI-Config+.
Specification
Internal power supply 1 x Lithium battery rechargeable
Battery capacity 1800 mAh
Battery charge by USB
Working time before recharge 75 hours
Operating range - 20°C + 50°C
International protection class IP 64 (DIN EN 60529)
Protection against penetration of dust
Protection against splashed water from all directions
Dimensions 228 mm x 278 mm x 38 mm
Weight 150 g
Registration range in Beacon mode Up to 1.80 meters, SIAC only
Beacon modes BC_CONTROL, BC_START, BC_FINISH
Registration range in direct mode Up to 5 cm, pCard
Direct modes CLEAR, CHECK, START, CONTROL, FINISH
ON/OFF by magnet switch
2