Installation Guide

FIT TIPS
1a Do not exceed the maximum load recommended by the car manufacturer.
1b Do not load large, long, or heavy objects on rack (furniture, boats, sailboards, car top boxes, etc...).
1g For models with hard top only.
1i For vehicles without factory installed roof racks only.
3b Install hook in groove above door.
3c Insert hook between rubber molding and solid roof detail (use a plastic card, calling card type, to gently pry molding away from vehicle).
3h Separate rubber molding from roof sill, insert hook on sill, then reposition molding.
3m Anchor to roof edge.
3u Attachment mechanism must be extremely tight to secure bar on roof.
3x Tighten bars until they are firm. Do not over tighten as overtightening may deform roof.
3y Both sides of the bar must be tightened simultaneously.
4i Hold the hook while tightening the mechanism.
4j Tighten until the hook deforms. The deformation must be big enough so that the rubbered surface of the hook is fully in contact
with the car anchoring surface.
4l Insert hook between rubber molding and plastic or chromed molding.
5f Install hook at manufacturer's recommended point of attachment.
9b Sun roof will not open.
9d Remove rack when not in use: the rubber door seal or trim may deform under prolonged contact with any roof rack brackets.
9q Skis and/or snowboards and bicycles only.
10a If your vehicle has factory crossbars, you do not need to purchase an additional rack system.
10b Factory crossbars are required to fit boxes and bags to this vehicle. Please contact your auto manufacturer to purchase these crossbars.
Applications for SportRack Roof Rack System*
If additional information is needed, please call Customer Service at 1-800-238-2388 or visit www.x-cargocarriers.com
*If your store does not have the SportRack Roof Rack Program, items are available via Special Order or on www.sears.com.
SEARSFG18