Full Product Manual

OM_GS_0717 www.sportsafieldsafes.com 15
18 ESL5 UL E-LOCK QUIET MODE
3. To mute the E-Lock, press [ C # ] and listen for a short warbling sound. Next,
press [ 8 0 # ] and listen for a short warbling sound. Lastly, press [ 1 # ] and
listen for a long warbling sound.
4. To un-mute the E-Lock, press [ C # ] and listen for a short warbling sound. Next,
press [ 8 0 # ] and listen for a short warbling sound. Lastly, press [ 0 # ] and
listen for a long warbling sound.
MOVING AND SECURING
19 SHIPPING SKID REMOVAL
WARNING: WHILE REMOVING THE BOLTS FROM THE SKIDS, BE SURE TO HAVE A
PERSON HOLD AND STABILIZE THE SAFE TO KEEP IT FROM TIPPING, CAUSING
INJURY, OR DAMAGE TO THE SAFE AND SURROUNDING STRUCTURES.
1. Upon receiving your safe, you may find it attached to a shipping skid. The skid
is secured from the underside of the safe by four bolts. Remove the four bolts
that secure the safe to the skids using a wrench or 11/16” (17mm) socket.
WARNING: BEFORE REMOVING THE SHIPPING SKIDS, MAKE SURE THE DOOR IS
CLOSED AND LOCKED. THE DOOR OF YOUR SAFE IS HEAVY AND PRESENTS A
SAFETY HAZARD UNTIL BOLTED DOWN OR SECURED PROPERLY.
2. With a person stabilizing the safe, carefully tilt the safe to the left, and pull the
free shipping skid away from bottom of the safe.
3. With the shipping skid removed from one side of the safe, carefully lower the
safe to the floor.
4. Follow the same procedure to remove the remaining shipping skid.
FOR SPORTS AFIELD MAXIMUM SECURITY SAFES (see page 8 for specific model
numbers).
1. Upon receiving your safe, you may find it attached to a shipping skid. The skid
is secured from the inside of the safe by four lag bolts.
2. Open your gun safe door and locate and remove the four black caps on the safe
floor. Remove the four bolts that secure the safe to the skids using a wrench or
9/16” (14mm) socket. Replace the four black caps.
3. Next, close the door and extend the locking bolts by rotating the handle
counter clockwise. Ensure the door is properly locked before proceeding.
4. With assistance, slide the safe to one side of the pallet so the safe over hangs
the far edge of the pallet. Carefully, tilt the safe over until the bottom side of